ISO/TS 10303-1846:2021 Mechanical design features and requirements


Application module: Mechanical design features and requirements	ISO/TS 10303-1846:2021(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
4.4 ARM function definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index


         (*
ISO/TC 184/SC 4/WG 12 N10176 - ISO/TS 10303-1846 Mechanical design features and requirements - EXPRESS MIM
Supersedes 
         ISO/TC 184/SC 4/WG 12 N9659
*)



SCHEMA Mechanical_design_features_and_requirements_mim;


         USE FROM
         Assembly_structure_mim;
            -- ISO/TS 10303-1026


         USE FROM
         Associative_draughting_elements_mim;
            -- ISO/TS 10303-1311


         USE FROM
         Characterizable_object_mim;
            -- ISO/TS 10303-1765


         USE FROM
         counterbore_countersink_schema;
            -- ISO 10303-113


         USE FROM
         Dimension_tolerance_mim;
            -- ISO/TS 10303-1050


         USE FROM
         Elemental_geometric_shape_mim;
            -- ISO/TS 10303-1004


         USE FROM
         Geometric_tolerance_mim;
            -- ISO/TS 10303-1051


         USE FROM
         Machining_features_mim;
            -- ISO/TS 10303-1814


         USE FROM
         mechanical_design_schema;
            -- ISO 10303-113


         USE FROM
         Part_view_definition_mim;
            -- ISO/TS 10303-1023


         USE FROM
         Requirement_assignment_mim;
            -- ISO/TS 10303-1233


         USE FROM
         Shape_property_assignment_mim;
            -- ISO/TS 10303-1032


         USE FROM
         Value_with_unit_extension_mim;
            -- ISO/TS 10303-1753


TYPE md_requirement_assigned_item =
         
         
         SELECT
         BASED_ON
         requirement_assigned_item
         WITH 
         

            (characterized_object, 
    dimensional_size, 
    dimensional_location, 
    geometric_tolerance, 
    product, 
    product_definition_formation, 
    product_definition, 
    shape_aspect, 
    product_definition_relationship);

         END_TYPE;


TYPE md_requirement_source_item =
         
         
         SELECT
         BASED_ON
         requirement_source_item
         WITH 
         

            (characterized_object, 
    dimensional_size, 
    dimensional_location, 
    geometric_tolerance, 
    product, 
    product_definition_formation, 
    product_definition, 
    shape_aspect, 
    product_definition_relationship);

         END_TYPE;


ENTITY mechanical_design_requirement_item_association

           SUBTYPE OF (pmi_requirement_item_association);

           SELF\pmi_requirement_item_association.requirement : requirement_assignment;

         
         END_ENTITY;



         END_SCHEMA;  -- Mechanical_design_features_and_requirements_mim