Integrated generic resource: Shape variation tolerances ISO 10303-47:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Shape aspect definition
   4.1 General
   4.2 Fundamental concepts and assumptions
   4.3 Shape aspect definition type definitions
   4.4 Shape aspect definition entity definitions
   4.5 Shape aspect definition subtype constraint definition
   4.6 Shape aspect definition rule definitions
5 Shape dimension
   5.1 General
   5.2 Fundamental concepts and assumptions
   5.3 Shape dimension type definitions
   5.4 Shape dimension entity definitions
6 Shape tolerance
   6.1 General
   6.2 Fundamental concepts and assumptions
   6.3 Shape tolerance type definitions
   6.4 Shape tolerance entity definitions
   6.5 Shape tolerance function definitions
   6.6 Shape tolerance rule definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

Index of Express-G pagesNext pageLast page
Figure D.1 — EXPRESS-G diagram of the shape_aspect_definition_schema (1 of 2) ../../resources/product_property_definition_schema/product_property_definition_schema.htm ../../resources/geometry_schema/geometry_schema.htm ../../resources/shape_dimension_schema/shape_dimension_schema.htm ../../resources/qualified_measure_schema/qualified_measure_schema.htm ../../resources/representation_schema/representation_schema.htm ../../resources/product_property_representation_schema/product_property_representation_schema.htm ../../resources/support_resource_schema/support_resource_schema.htm ../../resources/measure_schema/measure_schema.htm ../../resources/shape_aspect_definition_schema/shape_aspect_definition_schema.htm


Figure D.1 — EXPRESS-G diagram of the shape_aspect_definition_schema (1 of 2)


© ISO 2021 — All rights reserved