Application module: Assembly functional interface requirement ISO/TS 10303-1635:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../assembly_functional_interface_requirement/sys/5_mim.htm#assembly_functional_interface_requirement_mim.afir_document_reference_item ../packaged_part_black_box_model/sys/5_mim.htm#packaged_part_black_box_model_mim.packaged_part ../document_assignment/sys/5_mim.htm#document_assignment_mim.document_reference_item ../../resources/product_definition_schema/product_definition_schema.htm#product_definition_schema.product_definition ../assembly_functional_interface_requirement/sys/5_mim.htm#assembly_functional_interface_requirement_mim.protocol_physical_layer_definition_with_characterization ../assembly_functional_interface_requirement/sys/5_mim.htm#assembly_functional_interface_requirement_mim.minimally_defined_connector ../assembly_functional_interface_requirement/sys/5_mim.htm#assembly_functional_interface_requirement_mim.protocol_physical_layer_definition


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved