ISO/TS 10303-1638:2010-03 Assembly module with cable component 2D


Application module: Assembly module with cable component 2D	ISO/TS 10303-1638:2010-03(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
4.1 Required AM ARMs
4.2 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
Bibliography
Index


         (*
ISO TC184/SC4/WG12 N6306 - ISO/TS 10303-1638 Assembly module with cable component 2D - EXPRESS ARM
Supersedes 
         ISO TC184/SC4/WG12 N5581
*)



SCHEMA Assembly_module_with_cable_component_2d_arm;


         USE FROM
         Assembly_module_with_cable_component_arm;
            -- ISO/TS 10303-1644


         USE FROM
         Physical_unit_2d_design_view_arm;
            -- ISO/TS 10303-1724


ENTITY Routed_cable_component_2d_shape_model

           SUBTYPE OF (Assembly_component_2d_shape_model);

           cable_path_shape : SET[1:?] OF Curve;

           connector_placement : SET[1:?] OF Sub_model_placement_2d;

           junction_placement : 
         OPTIONAL 
         SET[1:?] OF Geometric_model_element_relationship;

           SELF\Assembly_component_2d_shape_model.shape_characterized_component : SET[1:1] OF Cable_component;
WHERE

           WR1: NOT EXISTS(SELF\Representation.description);

         
         END_ENTITY;


ENTITY Sub_model_placement_2d;

           placement : Axis_placement_2d;

           sub_model : Component_2d_location;

         
         END_ENTITY;



         END_SCHEMA;  -- Assembly_module_with_cable_component_2d_arm