Application module: Assembly module with cable component 3D ISO/TS 10303-1639:2010-03(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviations

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../extended_basic_geometry/sys/4_info_reqs.htm#extended_basic_geometry_arm.geometric_model_element_relationship ../physical_unit_3d_design_view/sys/4_info_reqs.htm#physical_unit_3d_design_view_arm.assembly_component_3d_shape_model ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../physical_unit_3d_design_view/sys/4_info_reqs.htm#physical_unit_3d_design_view_arm.component_3d_location ../curve_swept_solid/sys/4_info_reqs.htm#curve_swept_solid_arm.curve_swept_solid ../assembly_module_with_cable_component/sys/4_info_reqs.htm#assembly_module_with_cable_component_arm.cable_component ../assembly_module_with_cable_component_3d/sys/4_info_reqs.htm#assembly_module_with_cable_component_3d_arm.routed_cable_component_3d_shape_model ../assembly_module_with_cable_component_3d/sys/4_info_reqs.htm#assembly_module_with_cable_component_3d_arm.sub_model_placement_3d


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2009 — All rights reserved