Application module: Design material aspects ISO/TS 10303-1232:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../design_material_aspects/sys/4_info_reqs.htm#design_material_aspects_arm.dma_material_item_select ../generic_material_aspects/sys/4_info_reqs.htm#generic_material_aspects_arm.material_item_select ../assembly_structure/sys/4_info_reqs.htm#assembly_structure_arm.product_occurrence_definition_relationship ../product_view_definition_relationship/sys/4_info_reqs.htm#product_view_definition_relationship_arm.view_definition_relationship ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_view_definition ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved