Application module: Document assignment ISO/TS 10303-1122:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.documented_element_select ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.assigned_document_select ../document_and_version_identification/sys/4_info_reqs.htm#document_and_version_identification_arm.document_version ../file_identification/sys/4_info_reqs.htm#file_identification_arm.file ../document_definition/sys/4_info_reqs.htm#document_definition_arm.document_definition ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_view_definition ../document_and_version_identification/sys/4_info_reqs.htm#document_and_version_identification_arm.document ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.document_assignment ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.partial_document_assignment


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved