Application module: Drawing definition ISO/TS 10303-1309:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../drawing_definition/sys/5_mim.htm#drawing_definition_mim.specified_item ../../resources/management_resources_schema/management_resources_schema.htm#management_resources_schema.document_reference ../../resources/drawing_definition_schema/drawing_definition_schema.htm#drawing_definition_schema.drawing_revision ../../resources/aic_draughting_annotation/aic_draughting_annotation.htm#aic_draughting_annotation.draughting_symbol_representation ../drawing_definition/sys/5_mim.htm#drawing_definition_mim.drawing_sheet_layout ../drawing_definition/sys/5_mim.htm#drawing_definition_mim.draughting_specification_reference


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved