Application module: Feature and connection zone ISO/TS 10303-1671:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../feature_and_connection_zone/sys/4_info_reqs.htm#feature_and_connection_zone_arm.facz_shaped_element_select ../shape_feature/sys/4_info_reqs.htm#shape_feature_arm.shape_feature_definition ../surface_conditions/sys/4_info_reqs.htm#surface_conditions_arm.shaped_element_select ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../surface_conditions/sys/4_info_reqs.htm#surface_conditions_arm.surface_condition ../feature_and_connection_zone/sys/4_info_reqs.htm#feature_and_connection_zone_arm.feature_definition_with_connection_area ../feature_and_connection_zone/sys/4_info_reqs.htm#feature_and_connection_zone_arm.connection_zone


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved