Application module: Layout macro definition ISO/TS 10303-1701:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM entity definitions
   4.3 ARM subtype constraint definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.layered_interconnect_module_design_view ../printed_physical_layout_template/sys/4_info_reqs.htm#printed_physical_layout_template_arm.printed_part_template_terminal ../printed_physical_layout_template/sys/4_info_reqs.htm#printed_physical_layout_template_arm.printed_part_template ../layered_interconnect_module_with_printed_component_design/sys/4_info_reqs.htm#layered_interconnect_module_with_printed_component_design_arm.printed_component ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.fabricated_feature_select ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.layout_macro_definition ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.layout_macro_floor_plan_template ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.layout_macro_component ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.layout_macro_definition_terminal_to_usage_terminal_assignment ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.printed_component_subtypes ../layout_macro_definition/sys/4_info_reqs.htm#layout_macro_definition_arm.printed_part_template_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved