ISO/TS 10303-1717:2018-11 Part template 3D shape


Application module: Part template 3D shape	ISO/TS 10303-1717:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index


         (*
ISO/TC 184/SC 4/WG 12 N8238 - ISO/TS 10303-1717 Part template 3D shape - EXPRESS ARM
Supersedes 
         ISO/TC 184/SC 4/WG 12 N6483
*)



SCHEMA Part_template_3d_shape_arm;


         USE FROM
         Edge_shape_feature_arm;
            -- ISO/TS 10303-1673


         USE FROM
         Layered_3d_shape_arm;
            -- ISO/TS 10303-1694


         USE FROM
         Layered_interconnect_simple_template_arm;
            -- ISO/TS 10303-1718


         REFERENCE FROM 
         Requirement_decomposition_arm   -- ISO/TS 10303-1740
  (get_rvd);


TYPE pt3ds_part_template_or_physical_unit_3d_shape_model_select =
         
         
         SELECT
         BASED_ON
         part_template_or_physical_unit_3d_shape_model_select
         WITH 
         

            (Part_template_3d_shape_model);

         END_TYPE;


TYPE pt3ds_requirement_assignment_item =
         
         
         SELECT
         BASED_ON
         requirement_assignment_item
         WITH 
         

            (Part_template_3d_shape_model, 
    Part_template_3d_keepout_shape_model);

         END_TYPE;


ENTITY Edge_segment_cross_section

           SUBTYPE OF (Shape_definition_3d_intersection);

           SELF\Shape_definition_3d_intersection.surface_intersection_result : Edge_shape_model;

           SELF\Shape_definition_3d_intersection.projected_volume : Part_template_3d_shape_model;
DERIVE

           cross_section_reference : Edge_segment_vertex := SELF\Shape_definition_3d_intersection.projected_volume\Part_template_shape_model.shape_characterized_definition[1]\
         Inter_stratum_feature_edge_segment_template.start_vertex;

           associated_template : Template_definition := SELF\Shape_definition_3d_intersection.projected_volume\Part_template_shape_model.shape_characterized_definition[1];
INVERSE

           referencing_template : Inter_stratum_feature_edge_segment_template_with_cross_section FOR cross_section;
WHERE

           WR1: associated_template :=: referencing_template;

         
         END_ENTITY;


ENTITY Inter_stratum_feature_edge_segment_template_with_cross_section

           SUBTYPE OF (Inter_stratum_feature_edge_segment_template);

           cross_section : Edge_segment_cross_section;

         
         END_ENTITY;


ENTITY Part_template_3d_keepout_shape_model

           SUBTYPE OF (Non_feature_shape_model, Part_template_keepout_shape_model);
DERIVE

           application_technology_constraint : SET[0:?] OF Requirement_view_definition := get_rvd(SELF, 'application technology constraint');
WHERE

           WR1: (SIZEOF(application_technology_constraint) <= 1);

           WR2: NOT EXISTS(SELF\Representation.name);

           WR3: NOT EXISTS(SELF\Representation.description);

         
         END_ENTITY;


ENTITY Part_template_3d_shape_model

           SUBTYPE OF (Part_template_shape_model);
WHERE

           WR1: NOT EXISTS(SELF\Representation.name);

           WR2: NOT EXISTS(SELF\Representation.description);

         
         END_ENTITY;



         END_SCHEMA;  -- Part_template_3d_shape_arm