Application module: Part template shape with parameters ISO/TS 10303-1720:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.ptswp_external_identification_item ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.ptswp_view_shape_select ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.ptswp_requirement_assignment_item ../part_template/sys/4_info_reqs.htm#part_template_arm.template_definition ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.application_environment ../non_feature_shape_element/sys/4_info_reqs.htm#non_feature_shape_element_arm.view_shape_select ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.material_condition ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_source_identification ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_model ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.cartesian_point ../geometric_model_relationship/sys/4_info_reqs.htm#geometric_model_relationship_arm.geometric_model_relationship ../external_item_identification_assignment/sys/4_info_reqs.htm#external_item_identification_assignment_arm.external_identification_item ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.keepout_product_design_object_category ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.predefined_keepout_purpose ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.application_environment ../shape_parameters/sys/4_info_reqs.htm#shape_parameters_arm.material_condition ../requirement_assignment/sys/4_info_reqs.htm#requirement_assignment_arm.requirement_assignment_item ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.part_template_keepout_shape_model ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.part_template_shape_model ../part_template_shape_with_parameters/sys/4_info_reqs.htm#part_template_shape_with_parameters_arm.geometric_template


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved