Application module: Assembly module with packaged connector component ISO/TS 10303-1645:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.shape_aspect_relationship ../assembly_module_with_packaged_component/sys/5_mim.htm#assembly_module_with_packaged_component_mim.packaged_component ../interface_component/sys/5_mim.htm#interface_component_mim.interface_component ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.shape_aspect ../assembly_module_with_packaged_connector_component/sys/5_mim.htm#assembly_module_with_packaged_connector_component_mim.interface_mounted_join ../assembly_module_with_packaged_connector_component/sys/5_mim.htm#assembly_module_with_packaged_connector_component_mim.packaged_connector_component


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved