Application module: Assembly module with packaged connector component ISO/TS 10303-1645:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Altered_package_arm
   ARM interface 4.1
Altered_package_mim
   MIM interface 5.2
Assembly_module_with_packaged_component_arm
   ARM interface 4.1
Assembly_module_with_packaged_component_mim
   MIM interface 5.2
Interface_component_arm
   ARM interface 4.1
Interface_component_mim
   MIM interface 5.2
Interface_mounted_join
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
interface_mounted_join
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
Packaged_connector_component
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
packaged_connector_component
   MIM object definition 5.2.1.2
   MIM EXPRESS-G D.2
Packaged_connector_component_interface_terminal
   ARM object definition 4.2.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
Packaged_connector_model_arm
   ARM interface 4.1
Packaged_connector_model_mim
   MIM interface 5.2


© ISO 2018 — All rights reserved