ISO/TS 10303-1653:2018-11 Cable


Application module: Cable	ISO/TS 10303-1653:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARM
4.2 ARM entity definitions
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

use of a supertype entity does not make applicable any of its specializations, unless the specialization is also imported in the MIM schema;
use of a SELECT type does not make applicable any of its listed types unless the listed type is also imported in the MIM schema.

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:




         *)

            SCHEMA Cable_mim;

USE FROM Assembly_module_with_packaged_connector_component_mim; -- ISO/TS 10303-1645 (*

NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:

Assembly_module_with_packaged_connector_component_mim ISO/TS 10303-1645

NOTE 2 See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 cable_terminal

A cable_terminal is a type of shape_aspect that implements the ARM concept of Cable_terminal.

EXPRESS specification:

*) ENTITY cable_terminal SUBTYPE OF (shape_aspect); SELF\shape_aspect.of_shape : cable_usage_view; END_ENTITY; (*

Attribute definitions:

of_shape: an attribute inherited from the shape_aspect shall be redeclared as the cable_usage_view for the cable_terminal.

5.2.1.2 cable_usage_view

A cable_usage_view is a type of physical_unit that implements the ARM concept of Cable_usage_view.

EXPRESS specification:

*) ENTITY cable_usage_view SUBTYPE OF (physical_unit); END_ENTITY; (*




         *)

         END_SCHEMA;  -- Cable_mim
(*