Application module: Constructive solid geometry 3D ISO/TS 10303-1068:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM entity definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

EXPRESS specification:

*)
SCHEMA Constructive_solid_geometry_3d_mim;

USE FROM aic_csg;    --  ISO 10303-515

USE FROM Elemental_geometric_shape_mim;    --  ISO/TS 10303-1004

USE FROM Primitive_solids_mim;    --  ISO/TS 10303-1791
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

aic_csg ISO 10303-515
Elemental_geometric_shape_mim ISO/TS 10303-1004
Primitive_solids_mim ISO/TS 10303-1791

NOTE 2   See Annex D, Figure D.1 for a graphical representation of this schema.



*)
END_SCHEMA;  -- Constructive_solid_geometry_3d_mim
(*


© ISO 2014 — All rights reserved