Application module: Design specific assignment to interconnect usage view ISO/TS 10303-1663:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../design_specific_assignment_to_interconnect_usage_view/sys/4_info_reqs.htm#design_specific_assignment_to_interconnect_usage_view_arm.interconnect_or_assembly_module_select ../interconnect_module_usage_view/sys/4_info_reqs.htm#interconnect_module_usage_view_arm.interconnect_module_interface_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.stratum_concept ../physical_unit_usage_view/sys/4_info_reqs.htm#physical_unit_usage_view_arm.part_feature ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.component_termination_passage_interface_terminal ../layered_interconnect_module_with_printed_component_design/sys/4_info_reqs.htm#layered_interconnect_module_with_printed_component_design_arm.printed_connector_component_interface_terminal ../land/sys/4_info_reqs.htm#land_arm.land_interface_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.interconnect_module_macro_terminal ../physical_unit_design_view/sys/4_info_reqs.htm#physical_unit_design_view_arm.component_feature_to_physical_usage_view_assignment ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.fabricated_feature_select ../design_specific_assignment_to_interconnect_usage_view/sys/4_info_reqs.htm#design_specific_assignment_to_interconnect_usage_view_arm.component_terminal_to_interconnect_module_macro_terminal_assignment ../design_specific_assignment_to_interconnect_usage_view/sys/4_info_reqs.htm#design_specific_assignment_to_interconnect_usage_view_arm.stratum_concept_to_physical_usage_view_assignment ../design_specific_assignment_to_interconnect_usage_view/sys/4_info_reqs.htm#design_specific_assignment_to_interconnect_usage_view_arm.component_terminal_to_interconnect_module_interface_terminal_assignment ../design_specific_assignment_to_interconnect_usage_view/sys/4_info_reqs.htm#design_specific_assignment_to_interconnect_usage_view_arm.dsatiuv_component_feature_to_physical_usage_view_assignment_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2014 — All rights reserved