Application module: Design specific assignment to interconnect usage view ISO/TS 10303-1663:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Component_terminal_to_interconnect_module_interface_terminal_assignment
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Component_terminal_to_interconnect_module_macro_terminal_assignment
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
dsatiuv_component_feature_to_physical_usage_view_assignment_subtypes
   ARM object definition 4.4.1
   ARM EXPRESS-G C.2
Fabrication_joint_arm
   ARM interface 4.1
Fabrication_joint_mim
   MIM interface 5.2
interconnect_or_assembly_module_select
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
Stratum_concept_to_physical_usage_view_assignment
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3


© ISO 2014 — All rights reserved