Application module: Dimension tolerance ISO/TS 10303-1050:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 2 ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimension_value_select ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimension_target ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dt_activity_item ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.edge_of_undefined_shape_size_element ./armexpg3.htm ./armexpg3.htm ./armexpg3.htm ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.curve ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_limit ../activity/sys/4_info_reqs.htm#activity_arm.activity_item ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.geometric_coordinate_space ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.numerical_item_with_unit ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.undefined_edge_shape_enumeration_direction ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.adjoining_or_centred ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.angle_relator ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.geometric_dimension_modifier ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.tolerance_principle_type ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.radial_type ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.diameter_type ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.diameter_qualifier_enumeration ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.thickness_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.curved_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.edge_of_undefined_shape_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_location ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.measurement_path ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.angular_location ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.machining_feature_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.geometric_dimension ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.radial_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.angular_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.linear_distance ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.diameter_size ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.curved_distance


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 2


© ISO 2019 — All rights reserved