5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

• use of a supertype entity does not make applicable any of its specializations, unless the specialization is also imported in the MIM schema;
• use of a SELECT type does not make applicable any of its listed types unless the listed type is also imported in the MIM schema.

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

USE FROM Assembly_component_placement_requirements_mim;    --  ISO/TS 10303-1634



USE FROM Physical_connectivity_definition_mim;    --  ISO/TS 10303-1755
(*



NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Assembly_component_placement_requirements_mim	ISO/TS 10303-1634
Physical_connectivity_definition_mim	ISO/TS 10303-1755

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 physical_shield   

A physical_shield is a type of physical_component that implements the ARM concept of Physical_shield, when the shield is comprised of a component or components that are manufactured separately from the interconnect component.

EXPRESS specification:

*)
ENTITY physical_shield
  SUBTYPE OF (physical_component);
END_ENTITY;
(*

5.2.1.2 routed_physical_shield   

EXPRESS specification:

*)
ENTITY routed_physical_shield
  SUBTYPE OF (physical_shield, routed_physical_component);
END_ENTITY;
(*

© ISO 2018 — All rights reserved