Application module: Draughting annotation ISO/TS 10303-1206:2014-02(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARM
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

aic_draughting_annotation
   MIM interface 5.2
alternate_annotation_elements
   ARM object definition 4.4.1
   ARM EXPRESS-G C.2
Annotation_subfigure
   ARM object definition 4.3.1
   ARM EXPRESS-G C.2
   mapping specification 5.1.1
Annotation_symbol
   ARM object definition 4.3.2
   ARM EXPRESS-G C.2
   mapping specification 5.1.2
da_draughting_callout_content_select
   ARM object definition 4.2.1
   ARM EXPRESS-G C.2
Dimension_curve_terminator
   ARM object definition 4.3.3
   ARM EXPRESS-G C.2
   mapping specification 5.1.3
Dimension_symbol
   ARM object definition 4.3.4
   ARM EXPRESS-G C.2
   mapping specification 5.1.4
Draughting_callout
   mapping specification 5.1.5
Draughting_element_arm
   ARM interface 4.1
Draughting_element_mim
   MIM interface 5.2
draughting_element_schema
   MIM interface 5.2
General_symbol
   ARM object definition 4.3.5
   ARM EXPRESS-G C.2
   mapping specification 5.1.6
Geometric_tolerance_symbol
   ARM object definition 4.3.6
   ARM EXPRESS-G C.2
   mapping specification 5.1.7
pre_defined_dimension_symbol
   MIM object definition 5.2.1.1
   MIM EXPRESS-G D.2
pre_defined_geometrical_tolerance_symbol
   MIM object definition 5.2.1.2
   MIM EXPRESS-G D.2
pre_defined_surface_condition_symbol
   MIM object definition 5.2.1.3
   MIM EXPRESS-G D.2
presentation_definition_schema
   MIM interface 5.2
Surface_condition_symbol
   ARM object definition 4.3.7
   ARM EXPRESS-G C.2
   mapping specification 5.1.8
symbol_definition_select
   ARM object definition 4.2.2
   ARM EXPRESS-G C.2
Terminator_symbol
   ARM object definition 4.3.8
   ARM EXPRESS-G C.2
   mapping specification 5.1.9


© ISO 2014 — All rights reserved