Application module: Draughting element ISO/TS 10303-1310:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.1 Mapping specification

In the following, "Application element" designates any entity data type defined in Clause 4, any of its explicit attributes and any subtype constraint. "MIM element" designates any entity data type defined in Clause 5.2 or imported with a USE FROM statement, from another EXPRESS schema, any of its attributes and any subtype constraint defined in Clause 5.2 or imported with a USE FROM statement.

This clause contains the mapping specification that defines how each application element of this part of ISO 10303 (see Clause 4) maps to one or more MIM elements (see Clause 5.2).

The mapping for each application element is specified in a separate subclause below. The mapping specification of an attribute of an ARM entity is a subclause of the clause that contains the mapping specification of this entity. Each mapping specification subclause contains up to five elements.

Title: The clause title contains:

MIM element: This section contains, depending on the considered application element:

When the mapping of an application element involves more than one MIM element, each of these MIM elements is presented on a separate line in the mapping specification, enclosed between parentheses or brackets.

Source: This section contains:

This section is omitted when the keywords PATH or IDENTICAL MAPPING or NO MAPPING EXTENSION PROVIDED are used in the MIM element section.

Rules: This section contains the name of one or more global rules that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no rule applies, this section is omitted.

A reference to a global rule may be followed by a reference to the subclause in which the rule is defined.

Constraint: This section contains the name of one or more subtype constraints that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no subtype constraint applies, this section is omitted.

A reference to a subtype constraint may be followed by a reference to the subclause in which the subtype constraint is defined.

Reference path: This section contains:

For the expression of reference paths and of the constraints between MIM elements, the following notational conventions apply:

[] enclosed section constrains multiple MIM elements or sections of the reference path are required to satisfy an information requirement;
() enclosed section constrains multiple MIM elements or sections of the reference path are identified as alternatives within the mapping to satisfy an information requirement;
{} enclosed section constrains the reference path to satisfy an information requirement;
<> enclosed section constrains at one or more required reference path;
|| enclosed section constrains the supertype entity;
-> the attribute, whose name precedes the -> symbol, references the entity or select type whose name follows the -> symbol;
<- the entity or select type, whose name precedes the <- symbol, is referenced by the entity attribute whose name follows the <- symbol;
[i] the attribute, whose name precedes the [i] symbol, is an aggregate; any element of that aggregate is referred to;
[n] the attribute, whose name precedes the [n] symbol, is an ordered aggregate; member n of that aggregate is referred to;
=> the entity, whose name precedes the => symbol, is a supertype of the entity whose name follows the => symbol;
<= the entity, whose name precedes the <= symbol, is a subtype of the entity whose name follows the <= symbol;
= the string, select, or enumeration type is constrained to a choice or value;
\ the reference path expression continues on the next line;
* one or more instances of the relationship entity data type may be assembled in a relationship tree structure. The path between the relationship entity and the related entities, is enclosed with braces;
-- the text following is a comment or introduces a clause reference;
*> the select or enumeration type, whose name precedes the *> symbol, is extended into the select or enumeration type whose name follows the *> symbol;
<* the select or enumeration type, whose name precedes the <* symbol, is an extension of the select or enumeration type whose name follows the <* symbol;
!{} section enclosed by {} indicates a negative constraint placed on the mapping.
The definition and use of mapping templates are not supported in the present version of the application modules. However, use of predefined templates /MAPPING_OF/, /SUBTYPE/, and /SUPERTYPE/ is supported.

5.1.1 Annotation_fill_area

MIM element: annotation_fill_area
Source: ISO 10303-46

5.1.1.1 Annotation_fill_area to Curve (as boundaries)

MIM element: PATH
Reference path:   annotation_fill_area
annotation_fill_area.boundaries[i] ->
curve

5.1.2 Annotation_plane

MIM element: annotation_plane
Source: ISO 10303-46

5.1.2.1 Annotation_plane to Draughting_callout (as elements)

MIM element: PATH
Reference path:   annotation_plane.elements[i] ->
annotation_plane_element
annotation_plane_element = draughting_callout
draughting_callout

5.1.2.2 Annotation_plane to Planar_box (as element)

MIM element: PATH
Reference path:   annotation_plane <=
annotation_occurrence <=
styled_item
styled_item.item ->
representation_item =>
geometric_representation_item =>
planar_extent =>
planar_box

5.1.2.3 Annotation_plane to Plane (as element)

MIM element: PATH
Reference path:   annotation_plane <=
annotation_occurrence <=
styled_item
styled_item.item ->
representation_item =>
geometric_representation_item =>
surface =>
elementary_surface =>
plane

5.1.2.4 Annotation_plane to Styled_element (as elements)

MIM element: PATH
Reference path:   annotation_plane.elements[i] ->
annotation_plane_element
annotation_plane_element = styled_item
styled_item

5.1.3 Appearance_assignment

This application object, Appearance_assignment, is defined in the module appearance_assignment. This mapping section extends the mapping of Appearance_assignment, to include assertions defined in this module.

5.1.3.1 Appearance_assignment to Curve_appearance (as appearance_components)

MIM element: PATH
Reference path:   presentation_style_assignment
presentation_style_assignment.styles[i] ->
presentation_style_select
presentation_style_select = curve_style

5.1.3.2 Appearance_assignment to Point_appearance (as appearance_components)

MIM element: PATH
Reference path:   presentation_style_assignment
presentation_style_assignment.styles[i] ->
presentation_style_select
presentation_style_select = point_style

5.1.3.3 Appearance_assignment to Text_style (as appearance_components)

MIM element: PATH
Reference path:   presentation_style_assignment
presentation_style_assignment.styles[i] ->
presentation_style_select
presentation_style_select = text_style
text_style =>
text_style_with_box_characteristics

5.1.4 Dimension_curve

MIM element: dimension_curve
Source: ISO 10303-101

5.1.4.1 Dimension_curve to Terminator (as terminator)

MIM element: PATH
Reference path:   dimension_curve <=
annotation_curve_occurrence <-
terminator_symbol.annotated_curve
terminator_symbol <=
{terminator_symbol =>
dimension_curve_terminator}
annotation_symbol_occurrence <=
annotation_occurrence <=
styled_item
styled_item.item ->
representation_item =>
geometric_representation_item =>
defined_symbol
defined_symbol.definition ->
defined_symbol_select
defined_symbol_select = pre_defined_symbol
pre_defined_symbol =>
pre_defined_terminator_symbol

5.1.5 Dimension_curve_directed_callout

MIM element: dimension_curve_directed_callout
Source: ISO 10303-101

5.1.5.1 Dimension_curve_directed_callout to Dimension_curve (as dimension_curve)

MIM element: PATH
Reference path:   dimension_curve_directed_callout
draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_curve_occurrence
annotation_curve_occurrence =>
dimension_curve

5.1.6 Draughting_callout

MIM element: draughting_callout
Source: ISO 10303-506

5.1.6.1 Draughting_callout to Annotation_curve (as contents)

MIM element: PATH
Reference path:   draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_curve_occurrence
annotation_curve_occurrence

5.1.6.2 Draughting_callout to Annotation_placeholder_occurrence (as contents)

MIM element: PATH
Reference path:   draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_placeholder_occurrence
annotation_placeholder_occurrence

5.1.6.3 Draughting_callout to Annotation_text_occurrence (as contents)

MIM element: PATH
Reference path:   draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_text_occurrence
annotation_text_occurrence

5.1.6.4 Draughting_callout to draughting_callout_content_select (as contents)

MIM element: PATH
Reference path:   draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element

5.1.7 Fill_area

MIM element: annotation_fill_area_occurrence
Source: ISO 10303-46

5.1.7.1 Fill_area to Annotation_fill_area (as element)

MIM element: PATH
Reference path:   annotation_fill_area_occurrence <=
annotation_occurrence <=
styled_item
styled_item.item ->
representation_item =>
geometric_representation_item =>
annotation_fill_area

5.1.7.2 Fill_area to Point (as reference_point)

MIM element: PATH
Reference path:   annotation_fill_area_occurrence
annotation_fill_area_occurrence.fill_style_target ->
point

5.1.8 Generic_annotation_curve

MIM element: annotation_curve_occurrence
Source: 10303-504

5.1.9 Leader

#1:   

MIM element: leader_curve
Source: ISO 10303-101
Reference path:   {leader_curve <= annotation_curve_occurrence
annotation_curve_occurrence <= annotation_occurrence}

#2:   

MIM element: annotation_to_annotation_leader_line
Source: ISO 10303-101
Reference path:   {annotation_to_annotation_leader_line <= annotation_placeholder_leader_line
[annotation_placeholder_leader_line.geometric_elements ->
des_apll_point_select = apll_point]
annotation_placeholder_leader_line <-
annotation_placeholder_occurrence_with_leader_line.leader_line
annotation_placeholder_occurrence_with_leader_line}

#3:   

MIM element: annotation_to_model_leader_line
Source: ISO 10303-101
Reference path:   {annotation_to_model_leader_line <= annotation_placeholder_leader_line
{annotation_placeholder_leader_line.geometric_elements ->
(des_apll_point_select = apll_point)
(des_apll_point_select = apll_point_with_surface)}
annotation_placeholder_leader_line <-
annotation_placeholder_occurrence_with_leader_line.leader_line
annotation_placeholder_occurrence_with_leader_line}

#4:   

MIM element: auxiliary_leader_line
Source: ISO 10303-101
Reference path:   {auxiliary_leader_line <= annotation_placeholder_leader_line
{annotation_placeholder_leader_line.geometric_elements ->
(des_apll_point_select = apll_point)
(des_apll_point_select = apll_point_with_surface)}
annotation_placeholder_leader_line <-
annotation_placeholder_occurrence_with_leader_line.leader_line
annotation_placeholder_occurrence_with_leader_line}

5.1.10 Leader_directed_callout

MIM element: leader_directed_callout
Source: ISO 10303-101

5.1.10.1 Leader_directed_callout to Leader (as leader)

MIM element: PATH
Reference path:   leader_directed_callout
draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_curve_occurrence
annotation_curve_occurrence =>
leader_curve

5.1.11 Projection_curve

MIM element: projection_curve
Source: ISO 10303-101

5.1.12 Projection_directed_callout

MIM element: projection_directed_callout
Source: ISO 10303-101

5.1.12.1 Projection_directed_callout to Projection_curve (as projection_curve)

MIM element: PATH
Reference path:   projection_directed_callout
draughting_callout
draughting_callout.contents[i] ->
draughting_callout_element
draughting_callout_element = annotation_curve_occurrence
annotation_curve_occurrence =>
projection_curve

5.1.13 annotation_curve_subtypes

maps to subtype constraint annotation_curve_subtypes entity.

Constraint: annotation_curve_subtypes
Source: ISO 10303-101


© ISO 2021 — All rights reserved