|
|
Application module:
Electrical network definition |
ISO/TS 10303-1665:2006(E)
© ISO
|
This clause specifies the information requirements for the
Electrical network definition
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
The following EXPRESS specification begins the
Electrical_network_definition_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Electrical_network_definition_arm;
(*
The following EXPRESS interface statement specifies the elements
imported from the ARM of another application module.
EXPRESS specification:
*)
USE FROM
Network_functional_design_view_arm;
--
ISO/TS 10303-1704
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Network_functional_design_view_arm |
ISO/TS 10303-1704 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM entity for this
module. The ARM entity is an atomic element that
embodies a unique application concept and contains attributes
specifying the data elements of the entity. The ARM
entity and definition is specified below.
An Electrical_network_definition is a type of Functional_unit_network_definition that identifes that the nodes in the network definition default to voltage as the nodal property.
An approved electrical network shall be consistent with conservation laws (Kirchoff).
EXPRESS specification:
*)
ENTITY Electrical_network_definition
SUBTYPE OF (Functional_unit_network_definition);
END_ENTITY;
(*
*)
END_SCHEMA; -- Electrical_network_definition_arm
(*
© ISO 2006 — All rights reserved
