5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

• use of a supertype entity does not make applicable any of its specializations, unless the specialization is also imported in the MIM schema;
• use of a SELECT type does not make applicable any of its listed types unless the listed type is also imported in the MIM schema.

USE FROM Layered_interconnect_module_with_printed_component_design_mim;    --  ISO/TS 10303-1700



USE FROM Requirement_assignment_mim;    --  ISO/TS 10303-1233
(*



NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Layered_interconnect_module_with_printed_component_design_mim	ISO/TS 10303-1700
Requirement_assignment_mim	ISO/TS 10303-1233

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM entity definitions

This subclause specifies the MIM entities for this module. The MIM entities and definitions are specified below.

5.2.1.1 integral_shield   

EXPRESS specification:

*)
ENTITY integral_shield
  SUBTYPE OF (laminate_component);
END_ENTITY;
(*

5.2.1.2 routed_shield   

An routed_shield is a type of integral_shield that implements the ARM concept of Routed_shield.

EXPRESS specification:

*)
ENTITY routed_shield
  SUBTYPE OF (integral_shield);
END_ENTITY;
(*

© ISO 2009 — All rights reserved