Application module: Layered interconnect module with printed component design ISO/TS 10303-1700:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

3 Terms, definitions and abbreviated terms

3.1 Terms and definitions

3.1.1 Terms defined in ISO 10303-1

For the purposes of this document, the following terms defined in ISO 10303-1 apply:

3.1.2 Other terms and definitions

For the purposes of this document, the following terms and definitions apply:

3.1.2.1
printed component

part manufactured during PCB fabrication

3.2 Abbreviated terms

For the purposes of this document, the following abbreviated terms apply:

AM application module
AP application protocol
ARM application reference model
MIM module interpreted model
URL uniform resource locator


© ISO 2018 — All rights reserved