Application module: Machining features ISO/TS 10303-1814:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition
     5.2.2 MIM entity definition
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 19 ../machining_features/sys/4_info_reqs.htm#machining_features_arm.mf_groupable_item ../machining_features/sys/4_info_reqs.htm#machining_features_arm.manufacturing_group_select ./armexpg3.htm ./armexpg3.htm ../group/sys/4_info_reqs.htm#group_arm.group ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.additional_application_domain_enumeration ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element_relationship ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../group/sys/4_info_reqs.htm#group_arm.groupable_item ../machining_features/sys/4_info_reqs.htm#machining_features_arm.mf_additional_application_domain_enumeration ../machining_features/sys/4_info_reqs.htm#machining_features_arm.location_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.face_shape_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.face_shape_element_relationship ../machining_features/sys/4_info_reqs.htm#machining_features_arm.planar_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.direction_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.path_element ../machining_features/sys/4_info_reqs.htm#machining_features_arm.manufacturing_feature_group ../machining_features/sys/4_info_reqs.htm#machining_features_arm.mf_shape_element_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 19


© ISO 2019 — All rights reserved