ISO/TS 10303-1846:2021 Mechanical design features and requirements


Application module: Mechanical design features and requirements	ISO/TS 10303-1846:2021(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
4.4 ARM function definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
5.2.2 MIM entity definition

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
          4.2.1 md_requirement_assignment_item
          4.2.2 md_requirement_source_item
          4.2.3 md_tolerance_value_or_limits_and_fits
4.3 ARM entity definitions
          4.3.1 Basic_round_hole
          4.3.2 Basic_round_hole_occurrence
          4.3.3 Basic_round_hole_occurrence_in_assembly
          4.3.4 Explicit_round_hole
          4.3.5 Explicit_composite_hole
          4.3.6 Md_counterbore_hole_definition
          4.3.7 Simplified_md_counterbore_hole_definition
          4.3.8 Md_counterbore_hole_occurrence
          4.3.9 Md_counterbore_hole_occurrence_in_assembly
          4.3.10 Md_countersink_hole_definition
          4.3.11 Simplified_md_countersink_hole_definition
          4.3.12 Md_countersink_hole_occurrence
          4.3.13 Md_countersink_hole_occurrence_in_assembly
          4.3.14 Md_counterdrill_hole_definition
          4.3.15 Simplified_md_counterdrill_hole_definition
          4.3.16 Md_counterdrill_hole_occurrence
          4.3.17 Md_counterdrill_hole_occurrence_in_assembly
          4.3.18 Spotface_definition
          4.3.19 Spotface_hole_definition
          4.3.20 Simplified_spotface_hole_definition
          4.3.21 Spotface_occurrence
          4.3.22 Spotface_occurrence_in_assembly
          4.3.23 Mechanical_design_requirement_item_association
4.4 ARM function definition
          4.4.1 get_the_placement
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Basic_round_hole
          5.1.2 Basic_round_hole_occurrence
          5.1.3 Basic_round_hole_occurrence_in_assembly
          5.1.4 Explicit_composite_hole
          5.1.5 Explicit_round_hole
          5.1.6 Md_counterbore_hole_definition
          5.1.7 Md_counterbore_hole_occurrence
          5.1.8 Md_counterbore_hole_occurrence_in_assembly
          5.1.9 Md_counterdrill_hole_definition
          5.1.10 Md_counterdrill_hole_occurrence
          5.1.11 Md_counterdrill_hole_occurrence_in_assembly
          5.1.12 Md_countersink_hole_definition
          5.1.13 Md_countersink_hole_occurrence
          5.1.14 Md_countersink_hole_occurrence_in_assembly
          5.1.15 Mechanical_design_requirement_item_association
          5.1.16 Simplified_md_counterbore_hole_definition
          5.1.17 Simplified_md_counterdrill_hole_definition
          5.1.18 Simplified_md_countersink_hole_definition
          5.1.19 Simplified_spotface_hole_definition
          5.1.20 Spotface_definition
          5.1.21 Spotface_hole_definition
          5.1.22 Spotface_occurrence
          5.1.23 Spotface_occurrence_in_assembly
          5.1.24 Requirement_assignment
          5.1.25 Requirement_source
5.2 MIM EXPRESS short listing
5.2.1 MIM type definitions
          5.2.1.1 md_requirement_assigned_item
          5.2.1.2 md_requirement_source_item
5.2.2 MIM entity definition
          5.2.2.1 mechanical_design_requirement_item_association
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 2.2 Changes made to the ARM
F 2.3 Changes made to the MIM
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 3.2 Changes made to the ARM
Bibliography
Index

Figures

Figure 1 — Single bore option attributes for an Md_counterbore_hole_definition
Figure 2 — Multiple bore option attributes for an Md_counterbore_hole_definition
Figure 3 — Md_countersink_hole_definition attributes
Figure 4 — Md_counterdrill_hole_definition attributes
Figure 5 — Spotface_definition attributes
Figure 6 — Multibore Spotface_hole_definition
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 6
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 6
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 6
Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 6
Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 6
Figure C.7 — ARM entity level EXPRESS-G diagram 6 of 6
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings

Contents

Figures

Tables