|
|
Application module:
Part template non planar shape |
ISO/TS 10303-1719:2010-03(E)
© ISO
|
This clause specifies the information requirements for the
Part template non planar shape
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
The following EXPRESS specification begins the
Part_template_non_planar_shape_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Part_template_non_planar_shape_arm;
(*
The following EXPRESS interface statements specify the elements
imported from the ARMs of other application modules.
EXPRESS specification:
*)
USE FROM
Part_template_3d_shape_arm;
--
ISO/TS 10303-1717
USE FROM
Manifold_surface_arm;
--
ISO/TS 10303-1509
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Part_template_3d_shape_arm |
ISO/TS 10303-1717 |
| Manifold_surface_arm |
ISO/TS 10303-1509 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM type
for this application module. The ARM type and
definition is specified below.
The ptnps_part_template_or_physical_unit_3d_shape_model_select type is an extension
of the
part_template_or_physical_unit_3d_shape_model_select type.
It adds the data
type
Part_template_non_planar_2d_shape_model
to the list of alternate data types.
NOTE The list of entity data types may be
extended in application modules that use the constructs of
this module.
EXPRESS specification:
*)
TYPE
ptnps_part_template_or_physical_unit_3d_shape_model_select =
EXTENSIBLE
GENERIC_ENTITY
SELECT
BASED_ON
part_template_or_physical_unit_3d_shape_model_select
WITH
(Part_template_non_planar_2d_shape_model);
END_TYPE;
(*
This subclause specifies the ARM entity for this
module. The ARM entity is an atomic element that
embodies a unique application concept and contains attributes
specifying the data elements of the entity. The ARM
entity and definition is specified below.
A Part_template_non_planar_2d_shape_model is a type of
Manifold_surface_shape_representation
and a type of
Part_template_shape_model.
A Part_template_non_planar_2d_shape_model is the shape of a
Template_definition that is represented in the form of a surface.
EXPRESS specification:
*)
ENTITY Part_template_non_planar_2d_shape_model
SUBTYPE OF (Manifold_surface_shape_representation, Part_template_shape_model);
transformation : Axis_placement_3d;
WHERE
WR1: NOT EXISTS(SELF\Representation.name);
WR2: NOT EXISTS(SELF\Representation.description);
END_ENTITY;
(*
Attribute definitions:
transformation:
specifies a role of the
Axis_placement_3d
for the Part_template_non_planar_2d_shape_model.
Formal propositions:
WR1:
The
name
shall not be populated.
WR2:
The
description
shall not be populated.
*)
END_SCHEMA; -- Part_template_non_planar_shape_arm
(*
© ISO 2009 — All rights reserved
