Application module: Property assignment ISO/TS 10303-1030:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

5.2 MIM EXPRESS short listing

This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.

This clause constitutes the Module Interpreted Module (MIM) of the application module.

This clause also specifies the modifications that apply to the constructs imported from the common resources.

The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:

Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.

EXPRESS specification:

*)
SCHEMA Property_assignment_mim;

USE FROM Activity_mim;    --  ISO/TS 10303-1047

USE FROM basic_attribute_schema    --  ISO 10303-41
  (id_attribute,
   id_attribute_select);

USE FROM Foundation_representation_mim;    --  ISO/TS 10303-1006

USE FROM Independent_property_mim;    --  ISO/TS 10303-1036

USE FROM material_property_definition_schema    --  ISO 10303-45
  (property_definition_relationship);

USE FROM product_property_definition_schema    --  ISO 10303-41
  (general_property_association,
   property_definition);

USE FROM product_property_representation_schema    --  ISO 10303-41
  (property_definition_representation);
(*

NOTE 1   The schemas referenced above are specified in the following part of ISO 10303:

Activity_mim ISO/TS 10303-1047
basic_attribute_schema ISO 10303-41
Foundation_representation_mim ISO/TS 10303-1006
Independent_property_mim ISO/TS 10303-1036
material_property_definition_schema ISO 10303-45
product_property_definition_schema ISO 10303-41
product_property_representation_schema ISO 10303-41

NOTE 2   See Annex D, Figures D.1and D.2 for a graphical representation of this schema.

5.2.1 MIM type definition

This subclause specifies the MIM type for this application module. The MIM type and definition is specified below.

5.2.1.1 pa_action_items   EXPRESS-G

The pa_action_items type is an extension of the action_items type. It adds the data type property_definition_relationship to the list of alternate data types.

EXPRESS specification:

*)
TYPE pa_action_items = SELECT BASED_ON action_items WITH
   (property_definition_relationship);
END_TYPE;
(*



*)
END_SCHEMA;  -- Property_assignment_mim
(*


© ISO 2019 — All rights reserved