Application module: Tessellated geometry ISO/TS 10303-1819:2021(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 4 ./armexpg2.htm ./armexpg2.htm ../tessellated_geometry/sys/4_info_reqs.htm#tessellated_geometry_arm.tessellated_surface_set ../tessellated_geometry/sys/4_info_reqs.htm#tessellated_geometry_arm.triangulated_surface_set ../tessellated_geometry/sys/4_info_reqs.htm#tessellated_geometry_arm.coordinates_list ../tessellated_geometry/sys/4_info_reqs.htm#tessellated_geometry_arm.complex_triangulated_surface_set


Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 4


© ISO 2021 — All rights reserved