ISO 10303-101:2021(E)


Integrated application resource: Draughting	ISO 10303-101:2021(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Drawing definition
4.1 General
4.2 Fundamental concepts and assumptions
4.3 Drawing definition type definition
4.4 Drawing definition entity definitions
4.5 Drawing definition rule definitions
5 Draughting element
5.1 General
5.2 Fundamental concepts and assumptions
5.3 Draughting element type definitions
5.4 Draughting element entity definitions
5.5 Draughting element subtype constraint definition
6 Draughting dimension
6.1 General
6.2 Fundamental concepts and assumptions
6.3 Draughting dimension entity definitions

A Short names of entities
B Information object registration
C Computer interpretable listings
D EXPRESS-G diagrams
E Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Drawing definition schema
     4.1 General
     4.2 Fundamental concepts and assumptions
     4.3 Drawing definition type definition
          4.3.1 draughting_titled_item
     4.4 Drawing definition entity definitions
          4.4.1 draughting_title
          4.4.2 drawing_definition
          4.4.3 drawing_revision
          4.4.4 drawing_revision_sequence
          4.4.5 drawing_sheet_revision
          4.4.6 drawing_sheet_revision_sequence
          4.4.7 drawing_sheet_revision_usage
     4.5 Drawing definition rule definition
          4.5.1 drawing_sheets_not_nested
5 Draughting element schema
     5.1 General
     5.2 Fundamental concepts and assumptions
     5.3 Draughting element type definitions
          5.3.1 annotation_plane_element
          5.3.2 des_annotation_representation_select
          5.3.3 des_apll_point_select
          5.3.4 des_apll_point_symbol
          5.3.5 des_invisible_item
          5.3.6 dimension_extent_usage
          5.3.7 draughting_callout_element
          5.3.8 draughting_model_item_association_select
          5.3.9 draughting_model_item_definition
          5.3.10 draughting_model_item_select
          5.3.11 plane_or_planar_box
     5.4 Draughting element entity definitions
          5.4.1 annotation_placeholder_leader_line
          5.4.2 annotation_placeholder_occurrence_with_leader_line
          5.4.3 annotation_plane
          5.4.4 annotation_to_annotation_leader_line
          5.4.5 annotation_to_model_leader_line
          5.4.6 apll_point
          5.4.7 apll_point_with_surface
          5.4.8 auxiliary_leader_line
          5.4.9 dimension_curve
          5.4.10 dimension_curve_directed_callout
          5.4.11 dimension_curve_terminator
          5.4.12 draughting_callout
          5.4.13 draughting_callout_relationship
          5.4.14 draughting_model
          5.4.15 draughting_model_item_association
          5.4.16 leader_curve
          5.4.17 leader_directed_callout
          5.4.18 leader_terminator
          5.4.19 projection_curve
          5.4.20 projection_directed_callout
          5.4.21 terminator_symbol
          5.4.22 tessellated_annotation_occurrence
     5.5 Draughting element subtype constraint definition
          5.5.1 annotation_curve_subtypes
6 Draughting dimension schema
     6.1 General
     6.2 Fundamental concepts and assumptions
     6.3 Draughting dimension entity definitions
          6.3.1 dimension_callout
          6.3.2 dimension_graph
          6.3.3 dimension_graph_projection_curve_usage
          6.3.4 dimension_graph_sequence
Annex A Short names of entities
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C Computer interpretable listings
Annex D EXPRESS-G diagrams
Annex E Change history
E.1 General
E 2 Changes made in edition 2
E 2.1 Summary of changes
E 2.5 Changes made to schema draughting_element_schema
E 3 Changes made in edition 3
E 3.1 Summary of changes
E 3.3 Changes made to schema draughting_element_schema
E 4 Changes made in edition 4
E 4.1 Summary of changes
E 4.3 Changes made to schema draughting_element_schema
E 5 Changes made in edition 5
E 5.1 Summary of changes
E 5.3 Changes made to schema draughting_element_schema
E 6 Changes made in edition 6
E 6.1 Summary of changes
E 6.3 Changes made to schema drawing_definition_schema
E 6.5 Changes made to schema draughting_element_schema
Bibliography
Index

Figures

Figure 1 — The relationship of the schemas of this part to the ISO 10303 integration architecture (1 of 1)
Figure 2 — Leader line shared by dimension and tolerance
Figure 3 — An annotation_to_model_leader_line with forward arrowhead that starts at annotation and ends at model
Figure 4 — An auxiliary_leader_line with forward arrowhead that starts at a random location and ends at model
Figure 5 — An annotation_to_model_leader_line with no arrowhead that starts at annotation and ends at model
Figure 6 — An annotation_to_model_leader_line with internal arrowhead pair that starts at annotation and ends at model
Figure 7 — An annotation_to_model_leader_line circle as an "as provided" example
Figure 8 — An annotation_to_model_leader_line circle as an "as rendered" example
Figure 9 — An annotation_to_model_leader_line arrowhead pair as an "as rendered" example
Figure 10 — An annotation_to_model_leader_line positive arrowhead as an "as rendered" example
Figure 11 — An annotation_to_annotation_leader_line triangle as an "as rendered" example
Figure 12 — Dimension curves
Figure 13 — Dimension curve directed callout
Figure 14 — Leader curves
Figure 15 — Leader directed callout
Figure 16 — Projection curves
Figure 17 — Projection directed callout
Figure 18 — Dimension graphs
Figure D.1 — EXPRESS-G diagram of the drawing_definition_schema (1 of 2)
Figure D.2 — EXPRESS-G diagram of the drawing_definition_schema (2 of 2)
Figure D.3 — EXPRESS-G diagram of the draughting_element_schema (1 of 3)
Figure D.4 — EXPRESS-G diagram of the draughting_element_schema (2 of 3)
Figure D.5 — EXPRESS-G diagram of the draughting_element_schema (3 of 3)
Figure D.6 — EXPRESS-G diagram of the draughting_dimension_schema (1 of 2)
Figure D.7 — EXPRESS-G diagram of the draughting_dimension_schema (2 of 2)

Tables

Table C.1 — EXPRESS listings

Contents

Figures

Tables