Application module: Additive manufacturing part and build information ISO/TS 10303-1835:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM rule definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 3 ./armexpg3.htm ./armexpg3.htm ../part_shape/sys/4_info_reqs.htm#part_shape_arm.part_shape_element ../part_view_definition/sys/4_info_reqs.htm#part_view_definition_arm.part_view_definition ../item_definition_structure/sys/4_info_reqs.htm#item_definition_structure_arm.geometrical_relationship ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement_3d ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.initial_application_domain_enumeration ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.ampubi_initial_application_domain_enumeration ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_orientation_element ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_part_definition ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_x_direction_element ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_support_structure ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_build_direction_element ../additive_manufacturing_part_and_build_information/sys/4_info_reqs.htm#additive_manufacturing_part_and_build_information_arm.additive_manufacturing_part_view_subtypes


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 3


© ISO 2019 — All rights reserved