Application module: Additive manufacturing part and build information ISO/TS 10303-1835:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM rule definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Application module implementation and usage guide
G Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesNext pageLast page
Figure C.1 — ARM schema level EXPRESS-G diagram                         1 of 1 ../construction_geometry/armexpg1.htm ../part_view_definition/armexpg1.htm ../assembly_structure/armexpg1.htm ../value_with_unit_extension/armexpg1.htm ../elemental_geometric_shape/armexpg1.htm ../item_definition_structure/armexpg1.htm ../additive_manufacturing_part_and_build_information/armexpg2.htm ../process_plan/armexpg1.htm ../part_shape/armexpg1.htm


Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved