|
|
Application module:
Assembly module usage view |
ISO/TS 10303-1642:2018-11(E)
© ISO
|
This clause specifies the EXPRESS schema derived from the mapping
table.
It uses elements from the common resources or from other application
modules and defines the EXPRESS constructs that are specific to this
part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the
application module.
This clause also
specifies the modifications that apply to the constructs
imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application
modules:
-
use of a supertype entity does not make applicable any of its
specializations, unless the specialization is also imported in the
MIM schema;
-
use of a SELECT type does not make applicable any of its listed types
unless the listed type is also imported in the MIM schema.
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined
in Annex B.
EXPRESS specification:
*)
SCHEMA Assembly_module_usage_view_mim;
USE FROM
Functional_assignment_to_part_mim;
--
ISO/TS 10303-1674
USE FROM
Part_external_reference_mim;
--
ISO/TS 10303-1711
USE FROM
Part_feature_function_mim;
--
ISO/TS 10303-1712
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Functional_assignment_to_part_mim |
ISO/TS 10303-1674 |
| Part_external_reference_mim |
ISO/TS 10303-1711 |
| Part_feature_function_mim |
ISO/TS 10303-1712 |
NOTE 2
See Annex D,
Figures
D.1and D.2
for a graphical representation of this schema.
This subclause specifies the MIM entities for this
module. The MIM entities and definitions are specified below.
An assembly_module_interface_terminal is a type of
assembly_module_terminal
that implement the ARM concept of
Assembly_module_interface_terminal.
EXPRESS specification:
*)
ENTITY assembly_module_interface_terminal
SUBTYPE OF (assembly_module_terminal);
END_ENTITY;
(*
An assembly_module_terminal is a type of
shape_aspect
that implement the ARM concepts of:
An assembly_module_terminal may be an
assembly_module_interface_terminal.
EXPRESS specification:
*)
ENTITY assembly_module_terminal
SUPERTYPE OF (assembly_module_interface_terminal)
SUBTYPE OF (shape_aspect);
END_ENTITY;
(*
An assembly_module_usage_view is a type of
physical_unit
that implement the ARM concept of
Assembly_module_usage_view.
An assembly_module_usage_view may be a
Layered_assembly_module_usage_view.
EXPRESS specification:
*)
ENTITY assembly_module_usage_view
SUBTYPE OF (physical_unit);
END_ENTITY;
(*
*)
END_SCHEMA; -- Assembly_module_usage_view_mim
(*
© ISO 2018 — All rights reserved
