Application module: Fabrication joint ISO/TS 10303-1668:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.fabricated_feature_select ../land/sys/4_info_reqs.htm#land_arm.land_join_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.conductive_interconnect_element_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.layered_interconnect_module_design_view ../component_feature/sys/4_info_reqs.htm#component_feature_arm.component_feature_joint ../physical_unit_design_view/sys/4_info_reqs.htm#physical_unit_design_view_arm.connection_zone_in_design_view ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.embedded_physical_component_terminal ../layered_interconnect_module_with_printed_component_design/sys/4_info_reqs.htm#layered_interconnect_module_with_printed_component_design_arm.printed_component_join_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.stratum_feature_template_component ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.via_terminal ../layered_interconnect_module_design/sys/4_info_reqs.htm#layered_interconnect_module_design_arm.component_termination_passage_join_terminal ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.passage_terminal_based_fabrication_joint_link ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.connection_zone_based_fabrication_joint ../fabrication_joint/sys/4_info_reqs.htm#fabrication_joint_arm.fabrication_joint


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved