|
|
Application module:
Fabrication joint |
ISO/TS 10303-1668:2018-11(E)
© ISO
|
This clause specifies the EXPRESS schema derived from the mapping
table.
It uses elements from the common resources or from other application
modules and defines the EXPRESS constructs that are specific to this
part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the
application module.
This clause also
specifies the modifications that apply to the constructs
imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application
modules:
-
use of a supertype entity does not make applicable any of its
specializations, unless the specialization is also imported in the
MIM schema;
-
use of a SELECT type does not make applicable any of its listed types
unless the listed type is also imported in the MIM schema.
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined
in Annex B.
EXPRESS specification:
*)
SCHEMA Fabrication_joint_mim;
USE FROM
Land_mim;
--
ISO/TS 10303-1692
USE FROM
Layered_interconnect_module_with_printed_component_design_mim;
--
ISO/TS 10303-1700
REFERENCE FROM
product_property_definition_schema
--
ISO 10303-41
(acyclic_shape_aspect_relationship);
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Land_mim |
ISO/TS 10303-1692 |
| Layered_interconnect_module_with_printed_component_design_mim |
ISO/TS 10303-1700 |
| product_property_definition_schema |
ISO 10303-41 |
NOTE 2
See Annex D,
Figures
D.1and D.2
for a graphical representation of this schema.
This subclause specifies the MIM entities for this
module. The MIM entities and definitions are specified below.
A connection_zone_based_fabrication_joint is a type of
fabrication_joint
that implements the ARM concept of
Connection_zone_based_fabrication_joint.
A connection_zone_based_fabrication_joint includes the
identification of the connection zones that are to be mated in addition to the specific
features that are to be mated.
EXPRESS specification:
*)
ENTITY connection_zone_based_fabrication_joint
SUBTYPE OF (fabrication_joint);
END_ENTITY;
(*
A fabrication_joint is a type of component_feature_joint that implements the ARM concept
of Fabrication_joint.
EXPRESS specification:
*)
ENTITY fabrication_joint
SUBTYPE OF (component_feature_joint);
WHERE
WR1: acyclic_shape_aspect_relationship(SELF,
[SELF\shape_aspect_relationship.related_shape_aspect],
'FABRICATION_JOINT_MIM.'+
'FABRICATION_JOINT');
END_ENTITY;
(*
Formal propositions:
WR1:
There shall be no cycle in the graph of instances of the entity data type fabrication_joint.
A passage_terminal_based_fabrication_joint_link is a type of
shape_aspect
and of
shape_aspect_relationship
that implements the ARM concept of
Passage_terminal_based_fabrication_joint_link.
EXPRESS specification:
*)
ENTITY passage_terminal_based_fabrication_joint_link
SUBTYPE OF (shape_aspect, shape_aspect_relationship);
END_ENTITY;
(*
*)
END_SCHEMA; -- Fabrication_joint_mim
(*
© ISO 2018 — All rights reserved
