Application module: Fabrication joint ISO/TS 10303-1668:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
   4.4 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../component_feature/sys/5_mim.htm#component_feature_mim.component_feature_joint ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.shape_aspect ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.shape_aspect_relationship ../fabrication_joint/sys/5_mim.htm#fabrication_joint_mim.fabrication_joint ../fabrication_joint/sys/5_mim.htm#fabrication_joint_mim.connection_zone_based_fabrication_joint ../fabrication_joint/sys/5_mim.htm#fabrication_joint_mim.passage_terminal_based_fabrication_joint_link


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved