Application module: Fabrication technology ISO/TS 10303-1670:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM function definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definitions
     5.2.2 MIM entity definitions
     5.2.3 MIM subtype constraint definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 5 ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_value_select ./armexpg6.htm ./armexpg6.htm ../characterizable_object/sys/4_info_reqs.htm#characterizable_object_arm.characterizable_object ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_range ../measure_representation/sys/4_info_reqs.htm#measure_representation_arm.numerical_item_with_unit ../document_definition/sys/4_info_reqs.htm#document_definition_arm.document_definition ../characteristic/sys/4_info_reqs.htm#characteristic_arm.length_tolerance_characteristic ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../extended_measure_representation/sys/4_info_reqs.htm#extended_measure_representation_arm.value_limit ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.ft_terminus_condition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.default_component_termination_passage_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.default_tapered_blind_via_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.default_unsupported_passage_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.default_via_definition ../fabrication_technology/sys/4_info_reqs.htm#fabrication_technology_arm.passage_technology


Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 5


© ISO 2018 — All rights reserved