5.1 Mapping specification

In the following, "Application element" designates any entity data type defined in Clause 4, any of its explicit attributes and any subtype constraint. "MIM element" designates any entity data type defined in Clause 5.2 or imported with a USE FROM statement, from another EXPRESS schema, any of its attributes and any subtype constraint defined in Clause 5.2 or imported with a USE FROM statement.

This clause contains the mapping specification that defines how each application element of this part of ISO 10303 (see Clause 4) maps to one or more MIM elements (see Clause 5.2).

The mapping for each application element is specified in a separate subclause below. The mapping specification of an attribute of an ARM entity is a subclause of the clause that contains the mapping specification of this entity. Each mapping specification subclause contains up to five elements.

Title: The clause title contains:

• the name of the considered ARM entity or subtype constraint, or
• the name of the considered ARM entity atribute when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types, or
• a composite expression, <attribute name> to <referred type>, when this attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types.

MIM element: This section contains, depending on the considered application element:

• the name of one or more MIM entity data types;
• the name of a MIM entity attribute, presented with the syntax <entity name>.<attribute name>, when the considered ARM attribute refers to a type that is not an entity data type or a SELECT type that contains or may contain entity data types;
• the term PATH, when the considered ARM entity attribute refers to an entity data type or to a SELECT type that contains or may contain entity data types;
• the term IDENTICAL MAPPING, when both application objects involved in an application assertion map to the same instance of a MIM entity data type;
• the term NO MAPPING EXTENSION PROVIDED, when the extension to an extensible SELECT TYPE has no impact;
• the syntax /SUPERTYPE(<supertype name>)/, when the considered ARM entity is mapped as its supertype;
• one or more constructs /SUBTYPE(<subtype name>)/, when the mapping of the considered ARM entity is the union of the mapping of its subtypes.

When the mapping of an application element involves more than one MIM element, each of these MIM elements is presented on a separate line in the mapping specification, enclosed between parentheses or brackets.

Source: This section contains:

• the ISO standard number and part number in which the MIM element is defined, for those MIM elements that are defined in a common resource document;
• the ISO standard number and part number of this part of ISO 10303, for those MIM elements that are defined in the MIM schema of this part.

This section is omitted when the keywords PATH or IDENTICAL MAPPING or NO MAPPING EXTENSION PROVIDED are used in the MIM element section.

Rules: This section contains the name of one or more global rules that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no rule applies, this section is omitted.

A reference to a global rule may be followed by a reference to the subclause in which the rule is defined.

Constraint: This section contains the name of one or more subtype constraints that apply to the population of the MIM entity data types listed in the MIM element section or in the reference path. When no subtype constraint applies, this section is omitted.

A reference to a subtype constraint may be followed by a reference to the subclause in which the subtype constraint is defined.

Reference path: This section contains:

• the reference path to its supertypes in the common resources, for each MIM element created within this part of ISO 10303;
• the specification of the relationships between MIM elements, when the mapping of an application element requires to relate instances of several MIM entity data types. In such a case, each line in the reference path documents the role of a MIM element relative to the referring MIM element or to the next referred MIM element.

For the expression of reference paths and of the constraints between MIM elements, the following notational conventions apply:

5.1.1 Allocated_passage_minimum_annular_ring

5.1.1.1 Allocated_passage_minimum_annular_ring to Length_data_element (as minimum_fabrication_allowance)

5.1.1.2 Allocated_passage_minimum_annular_ring to Length_data_element (as supported_external_minimum_annular_ring)

5.1.1.3 Allocated_passage_minimum_annular_ring to Length_data_element (as supported_internal_minimum_annular_ring)

5.1.1.4 Allocated_passage_minimum_annular_ring to Length_data_element (as unsupported_minimum_annular_ring)

5.1.1.5 Allocated_passage_minimum_annular_ring to Passage_technology_allocation_to_stack_model (as associated_passage_allocation)

5.1.1.6 Allocated_passage_minimum_annular_ring to Stratum_technology_occurrence (as associated_stratum_technology_occurrence)

5.1.2 Assigned_property

This application object, Assigned_property, is defined in the module property_assignment. This mapping section extends the mapping of Assigned_property, to include assertions defined in this module.

5.1.2.1 Assigned_property to Passage_technology (as described_element)

5.1.2.2 Assigned_property to Stratum_technology (as described_element)

5.1.3 Classification_assignment

This application object, Classification_assignment, is defined in the module classification_assignment. This mapping section extends the mapping of Classification_assignment, to include assertions defined in this module.

5.1.3.1 Classification_assignment to Stratum_technology_occurrence_relationship (as items)

5.1.4 Copy_stratum_technology_occurrence_relationship

5.1.5 Default_component_termination_passage_definition

5.1.5.1 Default_component_termination_passage_definition to Length_tolerance_characteristic (as allowed_component_terminal_extent)

5.1.5.2 Default_component_termination_passage_definition to Length_tolerance_characteristic (as as_finished_deposition_thickness)

5.1.5.3 Default_component_termination_passage_definition to Numerical_item_with_unit (as as_finished_passage_extent)

5.1.5.4 Default_component_termination_passage_definition to Value_limit (as as_finished_passage_extent)

5.1.5.5 Default_component_termination_passage_definition to Value_range (as as_finished_passage_extent)

5.1.6 Default_tapered_blind_via_definition

5.1.6.1 Default_tapered_blind_via_definition to Length_tolerance_characteristic (as as_finished_interior_passage_extent)

5.1.7 Default_unsupported_passage_definition

5.1.7.1 Default_unsupported_passage_definition to Numerical_item_with_unit (as as_finished_passage_extent)

5.1.7.2 Default_unsupported_passage_definition to Value_limit (as as_finished_passage_extent)

5.1.7.3 Default_unsupported_passage_definition to Value_range (as as_finished_passage_extent)

5.1.8 Default_via_definition

5.1.8.1 Default_via_definition to Length_tolerance_characteristic (as as_finished_deposition_thickness)

5.1.8.2 Default_via_definition to Numerical_item_with_unit (as as_finished_passage_extent)

5.1.8.3 Default_via_definition to Value_limit (as as_finished_passage_extent)

5.1.8.4 Default_via_definition to Value_range (as as_finished_passage_extent)

5.1.9 Derived_stratum_technology_occurrence_relationship

5.1.10 Design_layer_technology

5.1.10.1 design_layer_purpose

5.1.11 Design_stack_model

5.1.11.1 Design_stack_model to Length_tolerance_characteristic (as model_thickness)

5.1.12 Document_assignment

This application object, Document_assignment, is defined in the module document_assignment. This mapping section extends the mapping of Document_assignment, to include assertions defined in this module.

5.1.12.1 Document_assignment to Passage_technology (as is_assigned_to)

5.1.12.2 Document_assignment to Stratum_surface_technology (as is_assigned_to)

5.1.12.3 Document_assignment to Stratum_technology (as is_assigned_to)

5.1.13 Documentation_layer_technology

5.1.13.1 Documentation_layer_technology to Predefined_documentation_layer_purpose (as pre_defined_documentation_layer_purpose)

5.1.14 Equivalent_stackup_model_definition

5.1.14.1 Equivalent_stackup_model_definition to Equivalent_sub_stack_definition (as equivalent_sub_stacks)

5.1.14.2 Equivalent_stackup_model_definition to Stratum_stack_model (as equivalent_stackup_model)

5.1.14.3 Equivalent_stackup_model_definition to Stratum_stack_model (as primary_stackup_model)

5.1.15 Equivalent_sub_stack_definition

5.1.15.1 Equivalent_sub_stack_definition to Local_linear_stack (as equivalent_stack)

5.1.15.2 Equivalent_sub_stack_definition to Stratum_technology_occurrence (as primary_sto)

5.1.15.3 Equivalent_sub_stack_definition to Stratum_technology_occurrence_link (as primary_sto_link)

5.1.16 External_source_identification

This application object, External_source_identification, is defined in the module external_item_identification_assignment. This mapping section extends the mapping of External_source_identification, to include assertions defined in this module.

5.1.16.1 External_source_identification to Design_layer_technology (as item)

5.1.16.2 External_source_identification to Documentation_layer_technology (as item)

5.1.17 Footprint_library_stratum_technology

5.1.18 Impedance_measurement_setup_requirement

5.1.18.1 Impedance_measurement_setup_requirement to Stratum_sub_stack (as characterized_stackup)

5.1.18.2 Impedance_measurement_setup_requirement to Stratum_technology_occurrence (as measurement_stratum_1)

5.1.18.3 Impedance_measurement_setup_requirement to Stratum_technology_occurrence (as measurement_stratum_2)

5.1.18.4 Impedance_measurement_setup_requirement to Stratum_technology_occurrence (as reference_stratum)

5.1.19 Impedance_requirement

5.1.19.1 Impedance_requirement to Impedance_measurement_setup_requirement (as test_bench)

5.1.19.2 Impedance_requirement to Test_specification (as test_method)

5.1.19.3 Impedance_requirement to Tolerance_characteristic (as impedance_value)

5.1.19.4 Impedance_requirement to Value_range (as frequency_range)

5.1.20 Inverse_copy_stratum_technology_occurrence_relationship

5.1.21 Local_linear_stack

5.1.21.1 Local_linear_stack to Stratum_technology_occurrence_link (as stratum_technology_sequence)

5.1.22 Material_identification

This application object, Material_identification, is defined in the module generic_material_aspects. This mapping section extends the mapping of Material_identification, to include assertions defined in this module.

5.1.22.1 Material_identification to Passage_technology (as items)

5.1.22.2 Material_identification to Stratum_technology (as items)

5.1.23 Passage_deposition_material_identification

5.1.23.1 Passage_deposition_material_identification to Passage_technology (as items)

5.1.24 Passage_filling_material_identification

5.1.24.1 Passage_filling_material_identification to Passage_technology (as items)

5.1.25 Passage_technology

5.1.25.1 maximum_aspect_ratio

5.1.25.2 passage_terminus_condition

5.1.25.3 plated_passage

5.1.25.4 Passage_technology to Length_data_element (as minimum_fabrication_allowance)

5.1.25.5 Passage_technology to Length_data_element (as minimum_finished_feature_size)

5.1.25.6 Passage_technology to Length_data_element (as minimum_finished_size)

5.1.25.7 Passage_technology to Length_data_element (as supported_external_minimum_annular_ring)

5.1.25.8 Passage_technology to Length_data_element (as supported_internal_minimum_annular_ring)

5.1.25.9 Passage_technology to Length_data_element (as unsupported_minimum_annular_ring)

5.1.25.10 Passage_technology to Length_tolerance_characteristic (as as_finished_deposition_thickness)

5.1.25.11 Passage_technology to Numerical_item_with_unit (as as_finished_passage_extent)

5.1.25.12 Passage_technology to Value_limit (as as_finished_passage_extent)

5.1.25.13 Passage_technology to Value_range (as as_finished_passage_extent)

5.1.26 Passage_technology_allocation_to_stack_model

5.1.26.1 Passage_technology_allocation_to_stack_model to Passage_technology (as allocated_technology)

5.1.26.2 Passage_technology_allocation_to_stack_model to Stratum_technology_occurrence (as single_stratum_passage_location)

5.1.26.3 Passage_technology_allocation_to_stack_model to Stratum_technology_occurrence (as target_stratum)

5.1.27 Requirement_assignment

This application object, Requirement_assignment, is defined in the module requirement_assignment. This mapping section extends the mapping of Requirement_assignment, to include assertions defined in this module.

5.1.27.1 Requirement_assignment to Passage_technology (as assigned_to)

5.1.27.2 Requirement_assignment to Stratum_technology (as assigned_to)

5.1.27.3 Requirement_assignment to Stratum_technology_occurrence (as assigned_to)

5.1.27.4 Requirement_assignment to Stratum_technology_occurrence_relationship (as assigned_to)

5.1.28 Stratum_stack_model

5.1.29 Stratum_sub_stack

5.1.29.1 Stratum_sub_stack to Design_stack_model (as associated_stackup)

5.1.29.2 Stratum_sub_stack to Length_tolerance_characteristic (as stack_thickness)

5.1.29.3 Stratum_sub_stack to Stratum_technology_occurrence_link (as stratum_technology_sequence)

5.1.30 Stratum_surface_technology

5.1.30.1 Stratum_surface_technology to Stratum_technology (as associated_definition)

5.1.31 Stratum_technology

5.1.31.1 laminate_stiffness_class

5.1.31.2 layer_position

5.1.31.3 minimum_aspect_ratio

5.1.31.4 Stratum_technology to Length_data_element (as maximum_feature_size_requirement)

5.1.31.5 Stratum_technology to Length_data_element (as minimum_finished_feature_size)

5.1.31.6 Stratum_technology to Length_data_element (as minimum_finished_feature_spacing)

5.1.31.7 Stratum_technology to Length_tolerance_characteristic (as stratum_thickness)

5.1.32 Stratum_technology_mapping_relationship

5.1.32.1 Stratum_technology_mapping_relationship to Footprint_library_stratum_technology (as source_stratum_technology)

5.1.32.2 Stratum_technology_mapping_relationship to Stratum_technology (as target_stratum_technology)

5.1.33 Stratum_technology_occurrence

5.1.33.1 name

5.1.33.2 Stratum_technology_occurrence to Angle_data_element (as rotation)

5.1.33.3 Stratum_technology_occurrence to Stratum_surface_technology (as primary)

5.1.33.4 Stratum_technology_occurrence to Stratum_technology (as definition)

5.1.34 Stratum_technology_occurrence_feature_constraint

5.1.34.1 Stratum_technology_occurrence_feature_constraint to Length_data_element (as difference_distance)

5.1.34.2 Stratum_technology_occurrence_feature_constraint to Length_data_element (as intersection_distance)

5.1.35 Stratum_technology_occurrence_link

5.1.35.1 base_stratum_technology_occurrence

5.1.36 Stratum_technology_occurrence_relationship

5.1.36.1 Stratum_technology_occurrence_relationship to Stratum_stack_model (as scope)

5.1.36.2 Stratum_technology_occurrence_relationship to Stratum_technology_occurrence (as sto_1)

5.1.36.3 Stratum_technology_occurrence_relationship to Stratum_technology_occurrence (as sto_2)

5.1.37 Stratum_technology_occurrence_swap_relationship

5.1.38 Stratum_technology_swap_relationship

5.1.38.1 Stratum_technology_swap_relationship to Stratum_technology (as primary_stratum_technology)

5.1.38.2 Stratum_technology_swap_relationship to Stratum_technology (as secondary_stratum_technology)

© ISO 2018 — All rights reserved