Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 5 ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_reference_modifier ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_or_common_datum ./armexpg2.htm ./armexpg2.htm ./armexpg5.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg2.htm ./armexpg5.htm ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.axis_placement ../elemental_geometric_shape/sys/4_info_reqs.htm#elemental_geometric_shape_arm.point ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../basic_geometry/sys/4_info_reqs.htm#basic_geometry_arm.plane ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_reference_modifier_type ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.simple_datum_reference_modifier ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.plane_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_reference_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_system ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.point_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_reference_compartment ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_system_with_associated_model_coordinate_system ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.datum_reference_modifier_with_value ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.axis_placement_shape_element ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.general_datum_reference ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.common_datum_list


Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 5


© ISO 2019 — All rights reserved