ISO/TS 10303-1051:2019 Geometric tolerance


Application module: Geometric tolerance	ISO/TS 10303-1051:2019(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM entity definitions
4.4 ARM subtype constraint definitions
4.5 ARM function definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions
5.2.2 MIM function definitions
5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms
4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
          4.2.1 area_unit_type
          4.2.2 collection_plane_orientation
          4.2.3 common_datum_list
          4.2.4 datum_or_common_datum
          4.2.5 datum_reference_modifier
          4.2.6 datum_reference_modifier_type
          4.2.7 directed_or_oriented_geometric_tolerance_select
          4.2.8 directed_tolerance_zone_type
          4.2.9 geometric_tolerance_auxiliary_classification_enum
          4.2.10 geometric_tolerance_modifier
          4.2.11 geometric_tolerance_target
          4.2.12 gps_filtration_specification_target
          4.2.13 gps_filtration_type
          4.2.14 length_or_angle_data_element_select
          4.2.15 oriented_tolerance_zone_type
          4.2.16 simple_datum_reference_modifier
          4.2.17 tolerance_zone_target
          4.2.18 tolerance_zone_type
4.3 ARM entity definitions
          4.3.1 Affected_plane_tolerance_zone
          4.3.2 All_around_shape_element
          4.3.3 All_around_shape_element_along_collection_plane
          4.3.4 Angularity_tolerance
          4.3.5 Axis_placement_shape_element
          4.3.6 Between_shape_element
          4.3.7 Circular_runout_tolerance
          4.3.8 Coaxiality_tolerance
          4.3.9 Concentricity_tolerance
          4.3.10 Contacting_feature
          4.3.11 Continuous_shape_element
          4.3.12 Cylindricity_tolerance
          4.3.13 Datum
          4.3.14 Datum_feature
          4.3.15 Datum_reference_compartment
          4.3.16 Datum_reference_element
          4.3.17 Datum_reference_modifier_with_value
          4.3.18 Datum_system
          4.3.19 Datum_system_with_associated_model_coordinate_system
          4.3.20 Datum_target
          4.3.21 Dimensional_location_with_datum_feature
          4.3.22 Dimensional_size_with_datum_feature
          4.3.23 Directed_or_oriented_tolerance_zone
          4.3.24 Directed_tolerance_zone
          4.3.25 Flatness_tolerance
          4.3.26 General_datum_reference
          4.3.27 Geometric_tolerance
          4.3.28 Geometric_tolerance_auxiliary_classification
          4.3.29 Geometric_tolerance_relationship
          4.3.30 Gps_filter
          4.3.31 Gps_filtration_specification
          4.3.32 Line_profile_tolerance
          4.3.33 Non_uniform_zone_definition
          4.3.34 Oriented_tolerance_zone
          4.3.35 Parallelism_tolerance
          4.3.36 Perpendicularity_tolerance
          4.3.37 Placed_target
          4.3.38 Plane_shape_element
          4.3.39 Point_shape_element
          4.3.40 Position_tolerance
          4.3.41 Projected_zone_definition
          4.3.42 Projected_zone_definition_with_offset
          4.3.43 Roundness_tolerance
          4.3.44 Runout_zone_definition
          4.3.45 Straightness_tolerance
          4.3.46 Surface_profile_tolerance
          4.3.47 Symmetry_tolerance
          4.3.48 Target_area
          4.3.49 Target_circle
          4.3.50 Target_circular_curve
          4.3.51 Target_curve
          4.3.52 Target_point
          4.3.53 Target_rectangle
          4.3.54 Target_straight_line
          4.3.55 Tolerance_zone
          4.3.56 Tolerance_zone_definition
          4.3.57 Tolerance_zone_with_datum
          4.3.58 Total_runout_tolerance
4.4 ARM subtype constraint definitions
          4.4.1 composite_shape_element_subtypes
          4.4.2 gl_shape_element_subtypes
4.5 ARM function definition
          4.5.1 sts_get_general_datum_reference
5 Module interpreted model
5.1 Mapping specification
          5.1.1 Affected_plane_tolerance_zone
          5.1.2 All_around_shape_element
          5.1.3 All_around_shape_element_along_collection_plane
          5.1.4 Angularity_tolerance
          5.1.5 Axis_placement_shape_element
          5.1.6 Between_shape_element
          5.1.7 Circular_runout_tolerance
          5.1.8 Coaxiality_tolerance
          5.1.9 Concentricity_tolerance
          5.1.10 Contacting_feature
          5.1.11 Continuous_shape_element
          5.1.12 Cylindricity_tolerance
          5.1.13 Datum
          5.1.14 Datum_feature
          5.1.15 Datum_reference_compartment
          5.1.16 Datum_reference_element
          5.1.17 Datum_reference_modifier_with_value
          5.1.18 Datum_system
          5.1.19 Datum_system_with_associated_model_coordinate_system
          5.1.20 Datum_target
          5.1.21 Dimensional_location_with_datum_feature
          5.1.22 Dimensional_size_with_datum_feature
          5.1.23 Directed_or_oriented_tolerance_zone
          5.1.24 Directed_tolerance_zone
          5.1.25 Flatness_tolerance
          5.1.26 General_datum_reference
          5.1.27 Geometric_tolerance
          5.1.28 Geometric_tolerance_auxiliary_classification
          5.1.29 Geometric_tolerance_relationship
          5.1.30 Gps_filter
          5.1.31 Gps_filtration_specification
          5.1.32 Line_profile_tolerance
          5.1.33 Non_uniform_zone_definition
          5.1.34 Oriented_tolerance_zone
          5.1.35 Parallelism_tolerance
          5.1.36 Perpendicularity_tolerance
          5.1.37 Placed_target
          5.1.38 Plane_shape_element
          5.1.39 Point_shape_element
          5.1.40 Position_tolerance
          5.1.41 Projected_zone_definition
          5.1.42 Projected_zone_definition_with_offset
          5.1.43 Roundness_tolerance
          5.1.44 Runout_zone_definition
          5.1.45 Straightness_tolerance
          5.1.46 Surface_profile_tolerance
          5.1.47 Symmetry_tolerance
          5.1.48 Target_area
          5.1.49 Target_circle
          5.1.50 Target_circular_curve
          5.1.51 Target_curve
          5.1.52 Target_point
          5.1.53 Target_rectangle
          5.1.54 Target_straight_line
          5.1.55 Tolerance_zone
          5.1.56 Tolerance_zone_definition
          5.1.57 Tolerance_zone_with_datum
          5.1.58 Total_runout_tolerance
5.2 MIM EXPRESS short listing
5.2.1 MIM entity definitions
          5.2.1.1 feature_for_datum_target_relationship
          5.2.1.2 placed_datum_target_feature
5.2.2 MIM function definitions
          5.2.2.1 get_shape_aspect_property_definition_representations
          5.2.2.2 valid_datum_target_parameters
5.2.3 MIM rule definitions
          5.2.3.1 non_uniform_zone_definition_constraint
          5.2.3.2 unique_gdt_element_id_constraint
          5.2.3.3 tolerance_zone_form_name_constraint
Annex A MIM short names
Annex B Information object registration
   B.1 Document identification
   B.2 Schema identification
Annex C ARM EXPRESS-G
Annex D MIM EXPRESS-G
Annex E Computer interpretable listings
Annex F Change history
F.1 General
F 2 Changes made in edition 2
F 2.1 Summary of changes
F 3 Changes made in edition 3
F 3.1 Summary of changes
F 3.2 Changes made to the ARM
F 4 Changes made in edition 4
F 4.1 Summary of changes
F 4.2 Changes made to the ARM
F 5 Changes made in edition 5
F 5.1 Summary of changes
F 5.2 Changes made to the ARM
F 5.3 Changes made to the MIM
F 6 Changes made in edition 6
F 6.1 Summary of changes
F 6.2 Changes made to the mapping
F 7 Changes made in edition 7
F 7.1 Summary of changes
F 7.2 Changes made to the ARM
F 7.3 Changes made to the mapping
F 7.4 Changes made to the MIM
F 8 Changes made in edition 8
F 8.1 Summary of changes
F 8.2 Changes made to the ARM
F 8.3 Changes made to the mapping
F 8.4 Changes made to the MIM
Bibliography
Index

Figures

Figure 1 — Runout zone definition
Figure C.1 — ARM schema level EXPRESS-G diagram 1 of 1
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 5
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5
Figure C.4 — ARM entity level EXPRESS-G diagram 3 of 5
Figure C.5 — ARM entity level EXPRESS-G diagram 4 of 5
Figure C.6 — ARM entity level EXPRESS-G diagram 5 of 5
Figure D.1 — MIM schema level EXPRESS-G diagram 1 of 1
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1

Tables

Table E.1 — ARM and MIM EXPRESS listings

Contents

Figures

Tables