Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious pageNext pageLast page
Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5 ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance_target ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.length_or_angle_data_element_select ./armexpg6.htm ./armexpg4.htm ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_location ../dimension_tolerance/sys/4_info_reqs.htm#dimension_tolerance_arm.dimensional_size ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.value_with_unit ../part_view_definition/sys/4_info_reqs.htm#part_view_definition_arm.part_view_definition ../support_resource/sys/4_info_reqs.htm#support_resource_arm.label ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.angle_data_element ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.value_with_unit ../support_resource/sys/4_info_reqs.htm#support_resource_arm.identifier ../value_with_unit_extension/sys/4_info_reqs.htm#value_with_unit_extension_arm.length_data_element ../part_shape/sys/4_info_reqs.htm#part_shape_arm.general_part_feature ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.area_unit_type ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance_modifier ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.line_profile_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.coaxiality_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.surface_profile_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.cylindricity_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.position_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.circular_runout_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.symmetry_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.roundness_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.perpendicularity_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.geometric_tolerance_relationship ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.straightness_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.angularity_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.concentricity_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.flatness_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.parallelism_tolerance ../geometric_tolerance/sys/4_info_reqs.htm#geometric_tolerance_arm.total_runout_tolerance


Figure C.3 — ARM entity level EXPRESS-G diagram 2 of 5


© ISO 2019 — All rights reserved