Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

ISO 129-1,  Technical drawings — Indication of dimensions and tolerances — Part 1: General principles

ISO 286-1,  ISO system of limits and fits — Part 1: Bases of tolerances, deviations and fits

ISO 286-2,  ISO system of limits and fits — Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

ISO 1101,  Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerancing of form, orientation, location and run-out

ISO 2692,  Technical drawings — Geometrical tolerancing — Maximum material principle

ISO 5458,  Geometric Product Specifications (GPS) — Geometrical tolerancing — Positional tolerancing

ISO 5459,  Geometric product specifications (GPS) — Geometrical tolerancing — Datums and datum systems

ISO 8015,  Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules

ISO 10303-1,  Industrial automation systems and integration — Product data representation and exchange — Part 1: Overview and fundamental principles

ISO 10303-11,  Industrial automation systems and integration — Product data representation and exchange — Part 11: Description methods: The EXPRESS language reference manual

ISO 10303-41,  Industrial automation systems and integration — Product data representation and exchange — Part 41: Integrated generic resource: Fundamentals of product description and support

ISO 10303-45,  Industrial automation systems and integration — Product data representation and exchange — Part 45: Integrated generic resource: Material and other engineering properties

ISO 10303-47,  Industrial automation systems and integration — Product data representation and exchange — Part 47: Integrated generic resource: Shape variation tolerances

ISO/TS 17450-1,  Geometrical Product Specification (GPS) — General concepts — Part 1: Model for geometrical specification and verification

ISO/TS 10303-1050,  Industrial automation systems and integration — Product data representation and exchange — Part 1050: Application module: Dimension tolerance

ISO/TS 10303-1118,  Industrial automation systems and integration — Product data representation and exchange — Part 1118: Application module: Measure representation

ISO/TS 10303-1130,  Industrial automation systems and integration — Product data representation and exchange — Part 1130: Application module: Derived shape element

ISO/TS 10303-1671,  Industrial automation systems and integration — Product data representation and exchange — Part 1671: Application module: Feature and connection zone

ISO/TS 10303-1742,  Industrial automation systems and integration — Product data representation and exchange — Part 1742: Application module: Shape composition

ISO/TS 10303-1753,  Industrial automation systems and integration — Product data representation and exchange — Part 1753: Application module: Value with unit extension

ISO/TS 10303-1800,  Industrial automation systems and integration — Product data representation and exchange — Part 1800: Application module: Support resource

ISO/TS 10303-1807,  Industrial automation systems and integration — Product data representation and exchange — Part 1807: Application module: Part shape



© ISO 2019 — All rights reserved