Application module: Geometric tolerance ISO/TS 10303-1051:2019(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM entity definitions
   4.4 ARM subtype constraint definitions
   4.5 ARM function definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM entity definitions
     5.2.2 MIM function definitions
     5.2.3 MIM rule definitions

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1 ../../resources/shape_aspect_definition_schema/shape_aspect_definition_schema.htm#shape_aspect_definition_schema.datum_target ../../resources/shape_aspect_definition_schema/shape_aspect_definition_schema.htm#shape_aspect_definition_schema.datum_target ../../resources/product_property_representation_schema/product_property_representation_schema.htm#product_property_representation_schema.property_definition_representation ../../resources/product_property_definition_schema/product_property_definition_schema.htm#product_property_definition_schema.shape_aspect_relationship ../geometric_tolerance/sys/5_mim.htm#geometric_tolerance_mim.feature_for_datum_target_relationship ../geometric_tolerance/sys/5_mim.htm#geometric_tolerance_mim.placed_datum_target_feature


Figure D.2 — MIM entity level EXPRESS-G diagram 1 of 1


© ISO 2019 — All rights reserved