|
|
Application module:
Part and version identification |
ISO/TS 10303-1022:2014-02(E)
© ISO
|
This clause specifies the information requirements for the
Part and version identification
application module. The information requirements are specified as the
Application Reference Model (ARM) of this application module.
NOTE 1 A graphical representation of the information
requirements is given in
Annex C.
NOTE 2 The mapping specification is specified in
5.1. It shows how
the information requirements are met by using common resources and
constructs defined or imported in the MIM schema of this application
module.
This clause defines the information requirements to which implementations shall
conform using the EXPRESS language as defined in ISO 10303-11.
The following begins the
Part_and_version_identification_arm
schema and identifies the necessary external references.
EXPRESS specification:
*)
SCHEMA Part_and_version_identification_arm;
(*
The following EXPRESS interface statements specify the elements
imported from the ARMs of other application modules.
EXPRESS specification:
*)
USE FROM
Product_identification_arm;
--
ISO/TS 10303-1017
USE FROM
Product_version_arm;
--
ISO/TS 10303-1018
(*
NOTE 1
The schemas referenced above are specified in the following
part of ISO 10303:
| Product_identification_arm |
ISO/TS 10303-1017 |
| Product_version_arm |
ISO/TS 10303-1018 |
NOTE 2
See Annex C,
Figures
C.1and C.2
for a graphical representation of this schema.
This subclause specifies the ARM entities for this
module. Each ARM application entity is an atomic element that
embodies a unique application concept and contains attributes
specifying the data elements of the entity. The ARM
entities and definitions are specified below.
A Part is a type of Product
that collects the definitional information of the versions of either a
part
or of a
non-countable material.
NOTE
A Part does not represent an actual physical object that is or was existing in the real world.
EXPRESS specification:
*)
ENTITY Part
SUBTYPE OF (Product);
END_ENTITY;
(*
A Part_version is a type of Product_version
that identifies a version of a part. A Part_version serves as the collector
of the data characterizing a realizable object in various application contexts.
NOTE
A Part_version is expected to be functionally and physically interchangeable with the other versions of the same Part.
EXPRESS specification:
*)
ENTITY Part_version
SUBTYPE OF (Product_version);
SELF\Product_version.of_product : Part;
END_ENTITY;
(*
Attribute definitions:
of_product:
the Part
of which the Part_version specifies a version.
*)
END_SCHEMA; -- Part_and_version_identification_arm
(*
© ISO 2014 — All rights reserved
