Application module: Product and manufacturing information with nominal 3D models ISO/TS 10303-1811:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../product_and_manufacturing_information_with_nominal_3d_models/sys/4_info_reqs.htm#product_and_manufacturing_information_with_nominal_3d_models_arm.pmiwn3dm_documented_element_select ../product_and_manufacturing_information_with_nominal_3d_models/sys/4_info_reqs.htm#product_and_manufacturing_information_with_nominal_3d_models_arm.advanced_face_model ../manifold_surface/sys/4_info_reqs.htm#manifold_surface_arm.manifold_surface_shape_representation ../advanced_boundary_representation/sys/4_info_reqs.htm#advanced_boundary_representation_arm.advanced_brep_shape_representation ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.product_shape_type_enumeration ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.initial_application_domain_enumeration ../product_view_definition/sys/4_info_reqs.htm#product_view_definition_arm.view_definition_context ../document_assignment/sys/4_info_reqs.htm#document_assignment_arm.documented_element_select ../manifold_subsurface/sys/4_info_reqs.htm#manifold_subsurface_arm.manifold_subsurface_model ../product_and_manufacturing_information_with_nominal_3d_models/sys/4_info_reqs.htm#product_and_manufacturing_information_with_nominal_3d_models_arm.pamap_initial_application_domain_enumeration ../product_and_manufacturing_information_with_nominal_3d_models/sys/4_info_reqs.htm#product_and_manufacturing_information_with_nominal_3d_models_arm.pmiwn3m_product_shape_type_enumeration


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved