Application module: Product and manufacturing information with nominal 3D models | ISO/TS 10303-1811:2018-11(E) © ISO |
This clause specifies the EXPRESS schema derived from the mapping table. It uses elements from the common resources or from other application modules and defines the EXPRESS constructs that are specific to this part of ISO 10303.
This clause constitutes the Module Interpreted Module (MIM) of the application module.
This clause also specifies the modifications that apply to the constructs imported from the common resources.
The following restrictions apply to the use, in this schema, of constructs defined in common resources or in application modules:
Short names of entities defined in this schema are described in Annex A. Unambiguous identification of this schema is defined in Annex B.
EXPRESS specification:
*)
SCHEMA Product_and_manufacturing_information_with_nominal_3d_models_mim;
USE FROM
Advanced_boundary_representation_mim;
--
ISO/TS 10303-1514
USE FROM
Construction_geometry_mim;
--
ISO/TS 10303-1131
USE FROM
Design_product_data_management_mim;
--
ISO/TS 10303-1628
USE FROM
Manifold_subsurface_mim;
--
ISO/TS 10303-1702
USE FROM
Manifold_surface_mim;
--
ISO/TS 10303-1509
USE FROM
Part_view_definition_mim;
--
ISO/TS 10303-1023
USE FROM
Shape_property_assignment_mim;
--
ISO/TS 10303-1032
(*
NOTE 1 The schemas referenced above are specified in the following part of ISO 10303:
Advanced_boundary_representation_mim ISO/TS 10303-1514 Construction_geometry_mim ISO/TS 10303-1131 Design_product_data_management_mim ISO/TS 10303-1628 Manifold_subsurface_mim ISO/TS 10303-1702 Manifold_surface_mim ISO/TS 10303-1509 Part_view_definition_mim ISO/TS 10303-1023 Shape_property_assignment_mim ISO/TS 10303-1032
NOTE 2 See Annex D, Figure D.1 for a graphical representation of this schema.
*)
END_SCHEMA; -- Product_and_manufacturing_information_with_nominal_3d_models_mim
(*
© ISO 2018 — All rights reserved