ISO/TS 10303-1811:2018-11 Product and manufacturing information with nominal 3D models


Application module: Product and manufacturing information with nominal 3D models	ISO/TS 10303-1811:2018-11(E) © ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
3.1 Terms and definitions
3.2 Abbreviated terms

4 Information requirements
4.1 Required AM ARMs
4.2 ARM type definitions
4.3 ARM rule definition
5 Module interpreted model
5.1 Mapping specification
5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G
D MIM EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Index

Advanced_boundary_representation_arm

ARM interface 4.1

Advanced_boundary_representation_mim

MIM interface 5.2

advanced_face_model

ARM object definition 4.2.1

ARM EXPRESS-G C.2

Construction_geometry_arm

ARM interface 4.1

Construction_geometry_mim

MIM interface 5.2

Design_product_data_management_arm

ARM interface 4.1

Design_product_data_management_mim

MIM interface 5.2

Document_assignment

mapping specification 5.1.1

Manifold_subsurface_arm

ARM interface 4.1

Manifold_subsurface_mim

MIM interface 5.2

Manifold_surface_arm

ARM interface 4.1

Manifold_surface_mim

MIM interface 5.2

nominal_3d_model_shape_constraint

ARM object definition 4.3.1

pamap_initial_application_domain_enumeration

ARM object definition 4.2.2

ARM EXPRESS-G C.2

Part_view_definition_arm

ARM interface 4.1

Part_view_definition_mim

MIM interface 5.2

pmiwn3dm_documented_element_select

ARM object definition 4.2.3

ARM EXPRESS-G C.2

pmiwn3m_product_shape_type_enumeration

ARM object definition 4.2.4

ARM EXPRESS-G C.2

Shape_property_assignment_arm

ARM interface 4.1

Shape_property_assignment_mim

MIM interface 5.2

© ISO 2018 — All rights reserved