Application module: Product and manufacturing information with nominal 3D models ISO/TS 10303-1811:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definitions
   4.3 ARM rule definition
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

(*
ISO/TC 184/SC 4/WG 12 N9371 - ISO/TS 10303-1811 Product and manufacturing information with nominal 3D models - EXPRESS MIM
Supersedes ISO/TC 184/SC 4/WG 12 N7937
*)



SCHEMA Product_and_manufacturing_information_with_nominal_3d_models_mim;

USE FROM Advanced_boundary_representation_mim;    -- ISO/TS 10303-1514

USE FROM Construction_geometry_mim;    -- ISO/TS 10303-1131

USE FROM Design_product_data_management_mim;    -- ISO/TS 10303-1628

USE FROM Manifold_subsurface_mim;    -- ISO/TS 10303-1702

USE FROM Manifold_surface_mim;    -- ISO/TS 10303-1509

USE FROM Part_view_definition_mim;    -- ISO/TS 10303-1023

USE FROM Shape_property_assignment_mim;    -- ISO/TS 10303-1032


END_SCHEMA;  -- Product_and_manufacturing_information_with_nominal_3d_models_mim


© ISO 2018 — All rights reserved