Application module: Derived shape element ISO/TS 10303-1130:2018-11(E)
© ISO

Cover page
Table of contents
Copyright
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and abbreviated terms
    3.1 Terms and definitions
    3.2 Abbreviated terms

4 Information requirements
   4.1 Required AM ARMs
   4.2 ARM type definition
   4.3 ARM entity definitions
5 Module interpreted model
   5.1 Mapping specification
   5.2 MIM EXPRESS short listing
     5.2.1 MIM type definition

A MIM short names
B Information object registration
C ARM EXPRESS-G   EXPRESS-G
D MIM EXPRESS-G   EXPRESS-G
E Computer interpretable listings
F Change history
Bibliography
Index

Mapping tableIndex of EXPRESS-G pagesFirst pagePrevious page
Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1 ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.dse_shape_model ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_element ../construction_geometry/sys/4_info_reqs.htm#construction_geometry_arm.constructive_geometry ../value_with_unit/sys/4_info_reqs.htm#value_with_unit_arm.value_with_unit ../shape_property_assignment/sys/4_info_reqs.htm#shape_property_assignment_arm.shape_model ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.geometric_alignment ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.centre_point ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.tangent_plane ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.extension ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.centre_of_symmetry ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.offset_shape_element ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.geometric_contact ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.derived_shape_element ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.parallel_offset ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.perpendicular_to ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.centre_plane ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.median_surface ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.centre_axis ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.median_curve ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.apex ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.tangent ../derived_shape_element/sys/4_info_reqs.htm#derived_shape_element_arm.geometric_intersection


Figure C.2 — ARM entity level EXPRESS-G diagram 1 of 1


© ISO 2018 — All rights reserved